
UNIDENTIFIED

SUPER IDE CONTROLLER CARD

Chipset                 Winbond
Data Bus                16-bit ISA
Card Size               Full height, half length
Hard Drives Supported   Two IDE(AT) devices
Floppy Drives Supported Unidentified

[Image]

                                CONNECTIONS

         Function            Label            Function            Label

  16-pin game port            CN1      25-pin parallel port -      CN5
                                       external

  40-pin IDE(AT)              CN2      Drive active LED            JP1
  connector

  34-pin cable connector      CN3      IDE IOCHRDY signal          JP9
  - floppy drive

  10-pin serial port 1 -      CN4
  internal

            Note:The location of the second serial port is unidentified.

                        USER CONFIGURABLE SETTINGS

                  Setting                       Label        Position

     Serial port 1 enabled                      JP2         Pins 1 & 2
                                                              closed

      Serial port 1 disabled                     JP2         Pins 2 & 3
                                                              closed

     Game port enabled                          JP3         Pins 1 & 2
                                                              closed

      Game port disabled                         JP3         Pins 2 & 3
                                                              closed

     Floppy interface enabled                   JP4         Pins 1 & 2
                                                              closed

      Floppy interface disabled                  JP4         Pins 2 & 3
                                                              closed

     Parallel port address is LPT2:             JP5         Pins 1 & 2
                                                              closed

      Parallel port address is LPT3:             JP5         Pins 2 & 3
                                                              closed

     IDE(AT) interface enabled                  JP6         Pins 1 & 2
                                                              closed

      IDE(AT) interface disabled                 JP6         Pins 2 & 3
                                                              closed

     Serial port 2 enabled                      JP7         Pins 1 & 2
                                                              closed

      Serial port 2 disabled                     JP7         Pins 2 & 3
                                                              closed

     Hard drive is connected to IDE             JP8         Pins 1 & 2
      interface                                               closed

      Hard drive is not connected to IDE         JP8         Pins 2 & 3
      interface                                               closed

