
CMD TECHNOLOGY, INC.

CSA-6400E

Card Type               Hard drive controller
Hard Drives supported   Four IDE (AT) drives
Floppy drives supported None
Data Bus                32-bit PCI
Card Size               Half length, full-height

[Image]

                                CONNECTIONS

        Function          Location          Function           Location

  40-pin secondary          CN1       Drive active LED            CN3
  IDE(AT) connector

  40-pin primary            CN2       Paddle board connector      CN4
  IDE(AT) connector

                        USER CONFIGURABLE SETTINGS

               Function                      Label           Position

     DskChg (removable media)               W2/1              Open
      disabled

      DskChg (removable media)               W2/1             Closed
      enabled

     Base address enabled                   W2/2             Closed

      Base address disabled                  W2/2              Open

     PCI chip enabled                       W2/3              Open

      PCI chip disabled                      W2/3             Closed

     Factory configured - do not          W3/ 1 - 4           Open
      alter

     Factory configured - do not          W4/ 1 - 4           Open
      alter

     Factory configured - do not             W5               Open
      alter

     Normal base addressing (Legacy     W6/pins 2 & 3        Closed
      mode) enabled

     Normal base addressing (Legacy     W7/pins 2 & 3        Closed
      mode) enabled

            Note:W6 & W7 pins 1 & 2 positions are not used.

