
STORAGE DIMENSIONS

LANSTOR EISA RAIDCARD

Card Type               Hard drive controller
Processor               Unidentified
Chipset:                Unidentified
Maximum On Board Memory 32MB
Hard Drives Supported   Up to 7 SCSI-2 Fast devices
                        Up to 7 SCSI-2 Wide devices
Floppy Drives Supported None
Data Bus                32-bit EISA
Card Size               Full length, full height
Raid Levels Supported   0, 1, 3, 5, 6, 7

[Image]

                           MAINBOARD CONNECTIONS

         Function           Location          Function           Location

  2-pin connector -           J2       68-pin SCSI Wide            P3
  status LED                           connector - internal

  2-pin connector - EISA      J3       50-pin SCSI Fast            P4
  activity LED                         connector - internal

  2-pin connector - SCSI      J5       SCSI connector -            P5
  activity LED                         external

  Daughter board              P2
  connector

                        DAUGHTER BOARD CONNECTIONS

        Function           Location          Function          Location

  Optional power              J2        68-pin SCSI Wide          P2
  connector for SCSI                    connector -
  terminators                           internal

  Main board connector        P1        50-pin SCSI Fast          P3
                                        connector -
                                        internal

            Note:Diagram not available for daughter board.

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

               MAIN BOARD SETTINGS

     Factory configured - do not alter           J1          Closed

     Factory configured - do not alter           J4           Open

     Factory configured - do not alter           J6           Open

     Factory configured - do not alter           J7         Pins 2 & 3
                                                              closed

            Note:Location of J1 and J4 is unidentified.

                    USER CONFIGURABLE SETTINGS (CONT)

                 Function                    Label         Position

            DAUGHTER BOARD SETTINGS

     Factory configured - do not alter       J1         Unidentified

      Termination enabled                     J3            Closed

      Termination disabled                    J3             Open

                        TERMINATION POWER SELECTION

                 Setting                                 J8

     TERMPWR supplied to SCSI interface               Closed

     DRAM CONFIGURATION

     Size        Bank 0

     4MB       (4) 1M x 9

     16MB      (4) 4M x 9

     32MB      (4) 8M x 9

