
INITIO CORPORATION

INI-9400U/UW

Card Type               Hard drive controller
Data Bus                32-bit PCI
Card Size               Quarter-length, full-height card
Hard Drives supported   Up to 60 Ultra or Ultra Wide SCSI devices
Floppy drives supported None

[Image]

                                CONNECTIONS

       Function           Location           Function          Location

  50-pin SCSI                J1         50-pin SCSI               J7
  connector channel 0                   connector channel
  - internal                            2 - internal

  4-pin connector -          J2         Drive active LED          J8
  drive active LED

  68-pin SCSI                J3         68-pin SCSI               J9
  connector - external                  connector channel
                                        2 - internal

  50-pin SCSI                J4         50-pin SCSI              J10
  connector channel 1                   connector channel
  - internal                            3 - internal

  Drive active LED           J5         Drive active LED         J11

  68-pin SCSI                J6         68-pin SCSI              J12
  connector channel 1                   connector channel
  - internal                            3 - internal

             TERMINATION CONFIGURATION FOR MULTIPLE INITIATORS

            Note: Jumpers JP1, JP2, JP3, and JP4 set active termination
            on each specific SCSI bus so it is always on. The setting is
            used only when the adapter shares the SCSI bus with an
            adapter in another computer. If this computer can be turned
            off, closing the jumper will insure that active on-board
            termination is on all the time, regardless of whether power
            is applied or not.

