
Q LOGIC CORPORATION

QLA 1240D

Card Type               Hard drive controller card
Chip Set                Unidentified
Maximum Onboard Memory  Unidentified
Hard Drives supported   Up to 30 SCSI-2 Fast/Wide/Differential devices,
Floppy drives supported None
Data Bus                32-bit PCI

[Image]

                                CONNECTIONS

         Function             Label            Function            Label

  68-pin SCSI connector -      J1      LED connector                J4
  external

  68-pin SCSI connector -      J2
  external

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

     Factory configured - do not alter          JP1          Closed
      (BIOS bank)

     Factory configured - do not alter          JP2          Closed
      (BIOS bank)

                         TERMINATION CONFIGURATION

    Connector      Controller Position         Termination Required

       J1          At end of SCSI bus     Internal host terminators RM9,
                                               RM11 & RM15 removed

       J1          Not at end of SCSI        Internal host terminators
                          bus                    RM9-RM6 removed

       J2          At end of SCSI bus     Internal host terminators RM1,
                                                RM7 & RM8 removed

       J2          Not at end of SCSI        Internal host terminators
                          bus                    RM1-RM8 removed

