
PARADISE SYSTEMS, INC.

PARADISE 16BIT SUPER IDE (CA9341F)

Card Type               Multi-I/O card
Hard Drives supported   Two IDE (AT) drives
Floppy drives supported Two 360KB, 720KB, 1.2MB, or 1.44MB drives
Data Bus                16-bit ISA
Card Size               Full-length, half-height card

[Image]

                                CONNECTIONS

        Function           Location          Function           Location

  2-pin connector -           J1       16-pin game port           CN5
  drive active LED

  40-pin primary IDE(AT)     CN2       10-pin serial port 2       CN6
  connector                            - internal

  34-pin cable connector     CN3       25-pin parallel port       CN8
  - floppy drive                       - external

  9-pin serial port 1 -      CN4
  external

                        USER CONFIGURABLE SETTINGS

                 Function                    Label         Position

     Serial port 2 enabled                   JP2      Pins 1 & 2 closed

      Serial port 2 disabled                  JP2      Pins 2 & 3 closed

     Game port enabled                       JP3      Pins 1 & 2 closed

      Game port disabled                      JP3      Pins 2 & 3 closed

     Serial port 1 enabled                   JP5      Pins 1 & 2 closed

      Serial port 1 disabled                  JP5      Pins 2 & 3 closed

     Floppy drive interface enabled          JP7      Pins 1 & 2 closed

      Floppy drive interface disabled         JP7      Pins 2 & 3 closed

     IDE(AT) interface enabled               JP8      Pins 1 & 2 closed

      IDE(AT) interface disabled              JP8      Pins 2 & 3 closed

     Factory configured - do not alter       JP9        Unidentified

     Factory configured - do not alter      JP10        Unidentified

     Factory configured - do not alter      JP11        Unidentified

     Factory configured - do not alter      JP12        Unidentified

     Factory configured - do not alter      JP14        Unidentified

                    DMA CHANNEL SELECTION

       Channel               JP15                 JP16

          1            Pins 1 & 2 closed   Pins 1 & 2 closed

          3            Pins 2 & 3 closed   Pins 2 & 3 closed

               PARALLEL PORT ADDRESS SELECTION

       Setting              Label               Position

     LPT1 (378h)             JP6           Pins 1 & 2 closed

     LPT2 (278h)             JP6           Pins 2 & 3 closed

                      SERIAL PORT 1 ADDRESS SELECTION

          Setting                   Label                 Position

          COM1 (3F8h)               JP4             Pins 1 & 2 closed

           COM3 (3E8h)               JP4             Pins 2 & 3 closed

                      SERIAL PORT 2 ADDRESS SELECTION

          Setting                   Label                 Position

          COM2 (2F8h)               JP1             Pins 1 & 2 closed

           COM4 (2E8h)               JP1             Pins 2 & 3 closed

                     SERIAL PORT 1 INTERRUPT SELECTION

            IRQ                     Label                 Position

             IRQ2(9)                  W1             Pins 4 & 6 closed

              IRQ3                    W1             Pins 2 & 4 closed

             IRQ4                    W1             Pins 3 & 4 closed

              IRQ5                    W1             Pins 7 & 9 closed

              IRQ7                    W1             Pins 9 & 10 closed

                     SERIAL PORT 2 INTERRUPT SELECTION

            IRQ                     Label                 Position

             IRQ2(9)                  W1             Pins 5 & 6 closed

             IRQ3                    W1             Pins 1 & 2 closed

              IRQ4                    W1             Pins 3 & 5 closed

              IRQ5                    W1             Pins 5 & 7 closed

                     PARALLEL PORT INTERRUPT SELECTION

            IRQ                     Label                 Position

             IRQ2(9)                  W1             Pins 6 & 8 closed

              IRQ5                    W1             Pins 7 & 8 closed

             IRQ7                    W1             Pins 8 & 10 closed

                       PARALLEL PORT MODE SELECTION

           Setting                    JP9                    JP10

           Standard           Pins 1 & 2 closed      Pins 2 & 3 closed

               EPP             Pins 2 & 3 closed      Pins 1 & 2 closed

               ECP             Pins 1 & 2 closed      Pins 1 & 2 closed

            Disabled           Pins 2 & 3 closed      Pins 2 & 3 closed

