
DATA TECHNOLOGY CORPORATION

DTC-2130S/D (900505-89B)

Card Type               Hard drive controller card
Hard Drives supported   Two IDE (AT) drives
Floppy drives supported None
Data Bus                32-bit PCI
Card Size               Half-length, half-height card

[Image]

                                CONNECTIONS

        Function           Location          Function           Location

  4-pin connector -           J2      40-pin primary IDE(AT)       J4
  drive active LED                    connector

  40-pin secondary            J3
  IDE(AT) connector

                        USER CONFIGURABLE SETTINGS

                 Function                    Label         Position

     Factory configured - do not alter       J1         Unidentified

               PRIMARY IDE INTERRUPT SELECTION

       IRQ 14               Label               Position

        INT A                 W1           Pins 1 & 3 closed

        INT B                 W1           Pins 2 & 4 closed

        INT C                 W1           Pins 3 & 5 closed

        INT D                 W1           Pins 4 & 6 closed

              SECONDARY IDE INTERRUPT SELECTION

       IRQ 15               Label               Position

        INT A                 W2           Pins 1 & 3 closed

        INT B                 W2           Pins 2 & 4 closed

        INT C                 W2           Pins 3 & 5 closed

        INT D                 W2           Pins 4 & 6 closed

