
RELIALOGIC CORPORATION PRIVATE, LTD.

CA9342 (REV. 2.0)

Card Type               Hard drive controller card
Hard Drives supported   Two IDE (AT) drives
Floppy drives supported Two 360KB, 720KB, 1.2MB, or 1.44MB drives
Data Bus                16-bit ISA
Card Size               Three-quarter length, half-height card

[Image]

                                CONNECTIONS

        Function          Location           Function           Location

  40-pin primary IDE(AT)     CN1      9-pin serial port 1 -       CN5
  connector                           external

  34-pin cable connector     CN2      25-pin parallel port -      CN6
  - floppy drive                      external

  10-pin serial port 2 -     CN3      2-pin connector -            J1
  internal                            drive active LED

  16-pin game port           CN4

                        USER CONFIGURABLE SETTINGS

                 Function                    Label         Position

     Serial port 1 enabled                   JP2      Pins 1 & 2 closed

      Serial port 1 disabled                  JP2      Pins 2 & 3 closed

     Game port enabled                       JP3      Pins 1 & 2 closed

      Game port disabled                      JP3      Pins 2 & 3 closed

     Serial port 2 enabled                   JP5      Pins 1 & 2 closed

      Serial port 2 disabled                  JP5      Pins 2 & 3 closed

     Floppy drive interface enabled          JP7      Pins 1 & 2 closed

      Floppy drive interface disabled         JP7      Pins 2 & 3 closed

     IDE interface enabled                   JP8      Pins 1 & 2 closed

      IDE interface disabled                  JP8      Pins 2 & 3 closed

     Parallel port enabled                   JP9      Pins 1 & 2 closed

      Parallel port disabled                  JP9      Pins 2 & 3 closed

     Factory configured - do not alter      JP10        Unidentified

                      PARALLEL PORT ADDRESS SELECTION

          Setting                   Label                 Position

          LPT1 (378h)               JP6             Pins 1 & 2 closed

           LPT2 (278h)               JP6             Pins 2 & 3 closed

                      SERIAL PORT 1 ADDRESS SELECTION

          Setting                   Label                 Position

          COM2 (2F8h)               JP1             Pins 1 & 2 closed

           COM4 (2E8h)               JP1             Pins 2 & 3 closed

                      SERIAL PORT 2 ADDRESS SELECTION

          Setting                   Label                 Position

          COM1 (3F8h)               JP4             Pins 1 & 2 closed

           COM3 (3E8h)               JP4             Pins 2 & 3 closed

                     SERIAL PORT 1 INTERRUPT SELECTION

            IRQ                     Label                 Position

             IRQ2(9)                  J2             Pins 4 & 6 closed

              IRQ3                    J2             Pins 2 & 4 closed

             IRQ4                    J2             Pins 3 & 4 closed

              IRQ5                    J2             Pins 7 & 9 closed

              IRQ7                    J2             Pins 9 & 10 closed

                     SERIAL PORT 2 INTERRUPT SELECTION

            IRQ                     Label                 Position

             IRQ2(9)                  J2             Pins 5 & 6 closed

             IRQ3                    J2             Pins 1 & 2 closed

              IRQ4                    J2             Pins 3 & 5 closed

              IRQ5                    J2              Pins 5& 7 closed

                     PARALLEL PORT INTERRUPT SELECTION

            IRQ                     Label                 Position

             IRQ2(9)                  J2             Pins 6 & 8 closed

              IRQ5                    J2             Pins 7 & 8 closed

             IRQ7                    J2             Pins 8 & 10 closed

