
QUATECH, INC.

QS-100D, QS-100DS

Card Type          I/O controller
Chipset/Controller Unidentified UART
I/O Options        Serial ports (4)
Maximum DRAM       N/A

[Image]

                                CONNECTIONS

               Purpose                              Location

  DB-37 connector for serial ports                    CN1
  (4)

                            CLOCK SPEED SELECT

                  Speed                                 J1

                 18.432MHz                      Pins 2 & 5 closed

                  9.612MHz                   Pins 1 & 2, 5 & 6 closed

                  3.6864MHz                  Pins 2 & 3, 4 & 5 closed

                  1.8432MHz               Pins 1 & 2, 3 & 6, 4 & 5 closed

                         I/O ADDRESS CONFIGURATION

          Address                    SW1                     SW2

           300h               1 & 2, 3 & 4, 5 & 6        3 & 4, 5 on
                                      on

           06A0h              1 & 2, 3 & 4, 5 on          2 & 4 on

           5220h               1 & 3, 5 & 6 on           2 & 3, 4 on

       Note:The address range for the QS-100D is from 0 to FFFFh. The
       switches are a binary representation of the addresses. The
       switches have the following decimal values: SW1/1=8, SW1/2=4,
       SW1/3=2, SW1/4=1, SW1/5=8, SW1/6=4, SW2/1=2, SW2/2=8, SW2/3=4,
       SW2/4=2, SW2/5=1.

              INTERRUPT SELECT

         IRQ                   J6

         IRQ2           Pins 1 & 7 closed

         IRQ3           Pins 2 & 8 closed

         IRQ4           Pins 3 & 9 closed

         IRQ5          Pins 4 & 10 closed

         IRQ6          Pins 5 & 11 closed

         IRQ7          Pins 6 & 12 closed

  INTERRUPT STATUS REGISTER CONFIGURATION

       Setting                SW2/6

   Interrupt Status             On

      Scratchpad               Off

  SERIAL PORT DTE/DCE CONFIGURATION

   Serial Port 1      Serial Port 2

     Jumper J2          Jumper J3

      [Image]            [Image]

  SERIAL PORT DTE/DCE CONFIGURATION

   Serial Port 3      Serial Port 4

     Jumper J4          Jumper J5

      [Image]            [Image]

