
QUATECH, INC.

DMM-100

Card Type               Digital multi-meter adapter
Chipset/Controller      Unidentified
I/O Options             Voltage, current, resistance and diode/continuity
                        inputs
Maximum DRAM            N/A

[Image]

                                CONNECTIONS

        Purpose           Location          Purpose           Location

  400mA range current        CN1        Ohmmeter test           CN4
  test lead input                       lead input

  4A range current           CN2        5-amp fuse               F1
  test lead input

  Common lead                CN3        5-amp fuse               F2
  connector

                             INTERRUPT SELECT

                  IRQ                                   J1

                 Disabled                         All Pins open

                    IRQ2                         Pins 1 & 2 closed

                    IRQ3                         Pins 3 & 4 closed

                    IRQ4                         Pins 5 & 6 closed

                    IRQ5                         Pins 7 & 8 closed

                    IRQ6                        Pins 9 & 10 closed

                    IRQ7                        Pins 11 & 12 closed

                    IRQ10                       Pins 13 & 14 closed

                    IRQ11                       Pins 15 & 16 closed

                    IRQ12                       Pins 17 & 18 closed

                    IRQ14                       Pins 19 & 20 closed

                    IRQ15                       Pins 21 & 22 closed

                         I/O ADDRESS CONFIGURATION

           Address                     SW1                   SW2

              300h             1, 2, 3, 4, 5 & 6    1, 2, 3, 4, 5 & 6 on
                                       on

               240h             1, 2, 3, 4, 5, 6 &    1, 3, 4, 5 & 6 on
                                      8 on

               6FC4h                1 & 4 on             3, 4 & 5 on

       Note: The address range for the DMM-100 is from 0 to FFFFh. The
       switches are a binary representation of the addresses. The
       switches have the following decimal values: SW1/1=8, SW1/2=4,
       SW1/3=2, SW1/4=1, SW1/5=8, SW1/6=4, SW1/7=2, SW1/8=1, SW2/1=8,
       SW2/2=4, SW2/3=2, SW2/4=1, SW2/5=8, SW2/6=4. The DMM-100 requires
       four consecutive address locations.

