
NATIONAL INSTRUMENTS

AT-A2150

Card Type          Dynamic signal acquisition converter
Chipset Controller Unidentified
I/O Options        Analog input, analog output
Maximum DRAM       N/A

[Image]

                                CONNECTIONS

       Purpose           Location           Purpose          Location

  34-pin interface          J1            Analog input          J4
  connector                              or output jack

  Analog input or           J2            Analog input          J5
  output jack                            or output jack

  Analog input or           J3            Analog input          J6
  output jack                            or output jack

  Note: Exact function of each jack is unidentified.

                        BASE I/O ADDRESS SELECTION

   Address       U44/A5      U44/A6      U44/A7      U44/A8      U44/A9

      120h        Off         On          On          Off         On

       000h        On          On          On          On          On

       020h        Off         On          On          On          On

       040h        On          Off         On          On          On

       060h        Off         Off         On          On          On

       080h        On          On          Off         On          On

       360h        Off         Off         On          Off         Off

       380h        On          On          Off         Off         Off

       3A0h        Off         On          Off         Off         Off

       3C0h        On          Off         Off         Off         Off

       3E0h        Off         Off         Off         Off         Off

       Note: A total of 255 base address settings are available. The
       switches are a binary representation of the decimal memory
       addresses. Switch A9 is the Most Significant Bit and switch A5 is
       the Least Significant Bit. The switches have the following decimal
       values: switch A9=512, A8=256, A7=128, A6=64, A5=32. Turn off the
       switches and add the values of the switches that are off to obtain
       the correct memory address. (Off=1, On=0)

