
CONNECT TECH, INC.

INTELLICON-NT960

Card Type              Serial card
Chip Set               Intel 80960 RISC
Maximum Onboard Memory 2MB SRAM/256KB Dual Ported RAM
I/O Options            Serial ports (128 on external modules)
Data Bus               16-bit ISA

[Image]

                          CONNECTIONS

            Function                         Label

  37-pin serial port connector                CN1

                        USER CONFIGURABLE SETTINGS

                   Setting                      Label        Position

     8-bit data transfer mode enabled           J12           Open

      16-bit data transfer mode enabled          J12          Closed

     Factory configured - do not alter         SW2/6           On

     Factory configured - do not alter         SW2/7           On

     Factory configured - do not alter         SW2/8           On

                           I/O ADDRESS SELECTION

  Address   SW1/1   SW1/2   SW1/3   SW1/4   SW1/5   SW1/6   SW1/7   SW1/8

     300h   On      On      On      On      On      On     Off     Off

      100h   On      On      On      On      On      On     Off      On

      104h   Off     On      On      On      On      On     Off      On

      108h   On      Off     On      On      On      On     Off      On

      10Ch   Off     Off     On      On      On      On     Off      On

      110h   On      On      Off     On      On      On     Off      On

      3ECh   Off     Off     On      Off    Off     Off     Off     Off

      3F0h   On      On      Off     Off    Off     Off     Off     Off

      3F4h   Off     On      Off     Off    Off     Off     Off     Off

      3F8h   On      Off     Off     Off    Off     Off     Off     Off

      3FCh   Off     Off     Off     Off    Off     Off     Off     Off

       Note: A total of 192 base address settings are available. The
       jumpers are a binary representation of the decimal memory
       addresses. Switch SW1/8 is the Most Significant Bit and switch
       SW1/1 is the Least Significant Bit. The switches have the
       following decimal values: switch SW1/8=512, SW1/7=256, SW1/6=128,
       SW1/5=64, SW1/4=32, SW1/3=16, SW1/2=8, SW1/1=4. Turn off the
       switches and add the values of the switches that are off to obtain
       the correct memory address. (Off=1, On=0)

                          BASE ADDRESS SELECTION

     Address        SW2/1      SW2/2       SW2/3      SW2/4       SW2/5

      D0000h        On          On         On         Off         On

       C0000h        On          On         On         On          On

       C2000h        Off         On         On         On          On

       C4000h        On         Off         On         On          On

       C6000h        Off        Off         On         On          On

       C8000h        On          On         Off        On          On

       F6000h        Off        Off         On         Off         Off

       F8000h        On          On         Off        Off         Off

       FA000h        Off         On         Off        Off         Off

       FC000h        On         Off         Off        Off         Off

       FE000h        Off        Off         Off        Off         Off

       Note: A total of 32 base address settings are available. The
       jumpers are a binary representation of the decimal memory
       addresses. Switch SW1/5 is the Most Significant Bit and switch
       SW1/1 is the Least Significant Bit. The switches have the
       following decimal values: switch SW1/5=8192, SW1/4=4096,
       SW1/3=2048, SW1/2=1024, SW1/1=512. Turn off the switches and add
       the values of the switches that are off to obtain the correct
       memory address. (Off=1, On=0)

                            INTERRUPT SELECTION

    IRQ       J1/A       J1/B      J1/C       J1/D      J1/E       J2/A

      10     Open       Open      Open       Open     Closed      Open

      2/9     Open       Open      Open       Open      Open       Open

       3      Open       Open      Open       Open      Open      Closed

       4      Open       Open      Open       Open      Open       Open

       5      Open       Open      Open       Open      Open       Open

       6      Open       Open      Open       Open      Open       Open

       7      Open       Open      Open       Open      Open       Open

       11     Open       Open      Open      Closed     Open       Open

       12     Open       Open     Closed      Open      Open       Open

       14    Closed      Open      Open       Open      Open       Open

       15     Open      Closed     Open       Open      Open       Open

                        INTERRUPT SELECTION (CONT)

     IRQ         J2/B        J2/C         J2/D        J2/E        J2/F

       10       Open        Open         Open        Open        Open

       2/9       Open        Open         Open        Open       Closed

        3        Open        Open         Open        Open        Open

        4       Closed       Open         Open        Open        Open

        5        Open       Closed        Open        Open        Open

        6        Open        Open        Closed       Open        Open

        7        Open        Open         Open       Closed       Open

        11       Open        Open         Open        Open        Open

        12       Open        Open         Open        Open        Open

        14       Open        Open         Open        Open        Open

        15       Open        Open         Open        Open        Open

                          SRAM CONFIGURATION

            Note: The exact configuration of memory is unidentified.

                     DUAL PORTED RAM CONFIGURATION

            Note: The exact configuration of memory is unidentified.

