
MULTI-TECH SYSTEMS, INC.

RD301PC

Card Type   Serial to network re-director
Chip Set    Unidentified
Data Bus    8-bit ISA

[Image]

                        USER CONFIGURABLE SETTINGS

                    Setting                        Label       Position

     COM port enabled                             SW1/8        Closed

      COM port disabled                            SW1/8         Open

     Card enabled                                 SW2/8        Closed

      Card disabled                                SW2/8         Open

                             COM PORT ADDRESS

    Setting       SW1/1   SW1/2   SW1/3    SW1/4   SW1/5   SW1/6    SW1/7

        000h       On      On      On       On      On      On       On

        008h      Off      On      On       On      On      On       On

        010h       On     Off      On       On      On      On       On

        018h      Off     Off      On       On      On      On       On

        020h       On      On      Off      On      On      On       On

        2E8h      Off      On      Off     Off      Off     On      Off
      (COM4:)

        2F8h      Off     Off      Off     Off      Off     On      Off
      (COM2:)

        3D8h      Off     Off      On      Off      Off     Off     Off

        3E0h       On      On      Off     Off      Off     Off     Off

       3E8h      Off      On      Off     Off      Off     Off     Off
      (COM3:)

        3F0h       On     Off      Off     Off      Off     Off     Off

        3F8h      Off     Off      Off     Off      Off     Off     Off
      (COM1:)

            Note: A total of 127 COM port address settings are available.
            The switches are a binary representation of the hexadecimal
            memory addresses. SW1/7 is the Most Significant Bit and
            switch SW1/1 is the Least Significant Bit. The switches have
            the following hexadecimal values: SW1/7=200h, SW1/6=100h,
            SW1/5=80h, SW1/4=40h, SW1/3=20h, SW1/2=10h, SW1/1=8h. Turn
            off the switches and add the values of the switches that are
            off to obtain the correct COM port address. (Off=1, On=0)

                             BASE I/O ADDRESS

  Setting     SW1/1    SW1/2   SW1/3    SW1/4    SW1/5    SW1/6    SW1/7

      000h     On       On       On       On      On       On       On

      008h     Off      On       On       On      On       On       On

      010h     On       Off      On       On      On       On       On

      018h     Off      Off      On       On      On       On       On

      020h     On       On      Off       On      On       On       On

     100h     On       On       On       On      On       Off      On

      3D8h     Off      Off      On      Off      Off      Off      Off

      3E0h     On       On      Off      Off      Off      Off      Off

      3E8h     Off      On      Off      Off      Off      Off      Off

      3F0h     On       Off     Off      Off      Off      Off      Off

      3F8h     Off      Off     Off      Off      Off      Off      Off

            Note: A total of 127 memory address settings are available.
            The switches are a binary representation of the hexadecimal
            memory addresses. SW1/7 is the Most Significant Bit and
            switch SW1/1 is the Least Significant Bit. The switches have
            the following hexadecimal values: SW1/7=200h, SW1/6=100h,
            SW1/5=80h, SW1/4=40h, SW1/3=20h, SW1/2=10h, SW1/1=8h. Turn
            off the switches and add the values of the switches that are
            off to obtain the correct memory address. (Off=1, On=0)

                              CARD INTERRUPT

  Setting      SW3/1     SW3/2     SW3/3      SW3/4     SW3/5     SW3/6

      IRQ2    Closed      Open      Open      Open      Open       Open

      IRQ3     Open      Closed     Open      Open      Open       Open

      IRQ4     Open       Open     Closed     Open      Open       Open

      IRQ5     Open       Open      Open     Closed     Open       Open

      IRQ6     Open       Open      Open      Open     Closed      Open

     IRQ7     Open       Open      Open      Open      Open      Closed

                            COM PORT INTERRUPT

          Setting                   SW3/7                   SW3/8

             IRQ3                  Closed                   Open

            IRQ4                   Open                   Closed

                       MISCELLANEOUS TECHNICAL NOTES

            This card redirects the I/O of the COM port to a serial
            device elsewhere on the network.

