
ARNET CORPORATION

SYNC/570I

Card Type              Serial
Chip Set               Hitachi
Maximum Onboard Memory 128KB RAM
I/O Options            Serial ports (4)
Data Bus               16-bit ISA

[Image]

                                CONNECTIONS

          Function            Label            Function            Label

  Four-port daughterboard      J1      Two-port daughterboard       J2
  header                               header

                        USER CONFIGURABLE SETTINGS

                  Setting                      Label         Position

     Fast Select enabled                       JP1          Pins 2 & 3
                                                              closed

      Fast Select disabled                      JP1          Pins 1 & 2
                                                              closed

                             BASE I/O ADDRESS

   Setting      SW1/1     SW1/2     SW1/3     SW1/4     SW1/5      SW1/6

       000h      On        On         On        On        On        On

       010h      Off       On         On        On        On        On

       020h      On        Off        On        On        On        On

       030h      Off       Off        On        On        On        On

       040h      On        On        Off        On        On        On

      300h      On        On         On        On       Off        Off

       3B0h      Off       Off        On       Off       Off        Off

       3C0h      On        On        Off       Off       Off        Off

       3D0h      Off       On        Off       Off       Off        Off

       3E0h      On        Off       Off       Off       Off        Off

       3F0h      Off       Off       Off       Off       Off        Off

            Note: A total of 127 memory address settings are available.
            The switches are a binary representation of the hexadecimal
            memory addresses. SW1/7 is the Most Significant Bit and
            switch SW1/1 is the Least Significant Bit. The switches have
            the following hexadecimal values: SW1/6=200h, SW1/5=100h,
            SW1/4=80h, SW1/3=40h, SW1/2=20h, SW1/1=10h. Turn off the
            switches and add the values of the switches that are off to
            obtain the correct memory address. (Off=1, On=0)

[Image]

                                CONNECTIONS

        Function           Label             Function             Label

  V.35 or V.24 serial       CN1      Daughterboard header           J1
  ports via DB-37

            Note: Serial ports are provided via included adapter cable.

                           PORT 1 TYPE

  Setting      JP1        JP2        JP3        JP4       JP5

   V.35       1 & 2      1 & 2      1 & 2      1 & 2     1 & 2

   V.24       2 & 3      2 & 3      2 & 3      2 & 3     2 & 3

            Note: Pins designated are in the closed position.

                           PORT 2 TYPE

  Setting      JP6        JP7        JP8        JP9       JP10

   V.35       1 & 2      1 & 2      1 & 2      1 & 2     1 & 2

   V.24       2 & 3      2 & 3      2 & 3      2 & 3     2 & 3

            Note: Pins designated are in the closed position.

[Image]

                                CONNECTIONS

         Function            Label            Function            Label

  V.35 or V.24 serial         CN1      Daughterboard header         J2
  ports via DB-62

  Daughterboard header         J1

            Note: Serial ports are provided via included adapter cable.

                           PORT 1 TYPE

  Setting      JP1        JP2        JP3        JP4       JP5

   V.35       1 & 2      1 & 2      1 & 2      1 & 2     1 & 2

   V.24       2 & 3      2 & 3      2 & 3      2 & 3     2 & 3

            Note: Pins designated are in the closed position.

                           PORT 2 TYPE

  Setting      JP6        JP7        JP8        JP9       JP10

   V.35       1 & 2      1 & 2      1 & 2      1 & 2     1 & 2

   V.24       2 & 3      2 & 3      2 & 3      2 & 3     2 & 3

            Note: Pins designated are in the closed position.

                           PORT 3 TYPE

  Setting     JP11       JP12       JP13       JP14       JP15

   V.35       1 & 2      1 & 2      1 & 2      1 & 2     1 & 2

   V.24       2 & 3      2 & 3      2 & 3      2 & 3     2 & 3

            Note: Pins designated are in the closed position.

                           PORT 4 TYPE

  Setting     JP16       JP17       JP18       JP19       JP20

   V.35       1 & 2      1 & 2      1 & 2      1 & 2     1 & 2

   V.24       2 & 3      2 & 3      2 & 3      2 & 3     2 & 3

            Note: Pins designated are in the closed position.

[Image]

                                CONNECTIONS

         Function           Label             Function             Label

  X.21 serial ports via      CN1     Daughterboard header            J1
  DB-44

            Note: Serial ports are provided via included adapter cable.

