
STALLION TECHNOLOGIES

EASY IO (DB-25 VERSION)

Card Type       Serial
Processor       CD1400
Processor Speed 12.5MHz
Chip Set        Unidentified
I/O Options     Serial ports (8)
Data Bus        16-bit ISA

[Image]

                                CONNECTIONS

               Function                              Label

  Serial ports                                        CN1

            Note: Serial ports are provided on an included adapter cable.

                        USER CONFIGURABLE SETTINGS

                    Setting                        Label       Position

     Factory configured - do not alter            SW1/7         Off

     Factory configured - do not alter            SW1/8         Off

            Note: The exact orientation of SW1/1 is unidentified.

                            SERIAL PORT ADDRESS

   Setting      SW1/1     SW1/2     SW1/3     SW1/4     SW1/5      SW1/6

       200h      On        On        On         On        On        On

       208h      Off       On        On         On        On        On

       210h      On        Off       On         On        On        On

       218h      Off       Off       On         On        On        On

       220h      On        On        Off        On        On        On

      2A0h      On        On        Off        On       Off        On

       3D8h      Off       Off       On        Off       Off        Off

       3E0h      On        On        Off       Off       Off        Off

       3E8h      Off       On        Off       Off       Off        Off

       3F0h      On        Off       Off       Off       Off        Off

       3F8h      Off       Off       Off       Off       Off        Off

            Note: A total of 63 base address settings are available. The
            switches are a binary representation of the hexadecimal
            memory addresses. SW1/6 is the Most Significant Bit and
            switch SW1/1 is the Least Significant Bit. The switches have
            the following hexadecimal values: SW1/6=100, SW1/5=80,
            SW1/4=40, SW1/3=20, SW1/2=10, SW1/1=8. Turn off the switches
            and add the values of the switches that are off to obtain the
            correct hexadecimal memory address. (Off=1, On=0)

