
SDL COMMUNICATIONS, INC.

RISCOM/8 (REV. E)

Card Type       Serial
Processor       Cirrus Logic CL-CD180
Processor Speed 10MHz
I/O Options     Serial ports (8)
Data Bus        16-bit ISA

[Image]

                                CONNECTIONS

               Function                               Label

  RS-422/485 serial ports via DB-78                    CN1
  connector

            Note:Standard DB-25 serial ports are provided on an included
            adapter cable.

                        USER CONFIGURABLE SETTINGS

                   Setting                      Label        Position

     Port 1 is RS-485 interface                 J1           Closed

      Port 1 is RS-422 interface                 J1            Open

     Port 2 is RS-485 interface                 J2           Closed

      Port 2 is RS-422 interface                 J2            Open

     Port 3 is RS-485 interface                 J3           Closed

      Port 3 is RS-422 interface                 J3            Open

     Port 4 is RS-485 interface                 J4           Closed

      Port 4 is RS-422 interface                 J4            Open

     Port 5 is RS-485 interface                 J5           Closed

      Port 5 is RS-422 interface                 J5            Open

     Port 6 is RS-485 interface                 J6           Closed

      Port 6 is RS-422 interface                 J6            Open

     Port 7 is RS-485 interface                 J7           Closed

      Port 7 is RS-422 interface                 J7            Open

     Port 8 is RS-485 interface                 J8           Closed

      Port 8 is RS-422 interface                 J8            Open

     Port 1 is terminated                      J9/A          Closed

      Port 1 is not terminated                  J9/A           Open

     Port 2 is terminated                      J9/B          Closed

      Port 2 is not terminated                  J9/B           Open

                    USER CONFIGURABLE SETTINGS (CONT)

                   Setting                      Label        Position

     Port 3 is terminated                      J9/C          Closed

      Port 3 is not terminated                  J9/C           Open

     Port 4 is terminated                      J9/D          Closed

      Port 4 is not terminated                  J9/D           Open

     Port 5 is terminated                      J9/E          Closed

      Port 5 is not terminated                  J9/E           Open

     Port 6 is terminated                      J9/F          Closed

      Port 6 is not terminated                  J9/F           Open

     Port 7 is terminated                      J9/G          Closed

      Port 7 is not terminated                  J9/G           Open

     Port 8 is terminated                      J9/H          Closed

      Port 8 is not terminated                  J9/H           Open

            Note:On some versions of this card, J9 may be a one-use shunt
            block.

                           WAIT STATE SELECTION

          Setting                   S1/7                    S1/8

              0                     On                      On

               1                     Off                     On

               2                     On                      Off

                                INTERRUPT SELECTION

  Setting    J10/A    J10/B    J10/C    J10/D    J10/E    J10/F    J10/G    J10/H

      IRQ3   Closed    Open     Open     Open    Open     Open     Open     Open

      IRQ4    Open    Closed    Open     Open    Open     Open     Open     Open

     IRQ5    Open     Open    Closed    Open    Open     Open     Open     Open

      IRQ7    Open     Open     Open    Closed   Open     Open     Open     Open

      IRQ10   Open     Open     Open     Open    Closed   Open     Open     Open

      IRQ11   Open     Open     Open     Open    Open     Closed   Open     Open

      IRQ12   Open     Open     Open     Open    Open     Open     Closed   Open

      IRQ15   Open     Open     Open     Open    Open     Open     Open     Closed

                        BASE I/O ADDRESS SELECTION

   Setting       S1/1      S1/2      S1/3      S1/4      S1/5      S1/6

       000h       On        On        On        On        On        On

       010h       Off       On        On        On        On        On

       020h       On       Off        On        On        On        On

       030h       Off      Off        On        On        On        On

       040h       On        On       Off        On        On        On

      220h       On       Off        On        On        On       Off

       3B0h       Off      Off        On       Off       Off       Off

       3C0h       On        On       Off       Off       Off       Off

       3D0h       Off       On       Off       Off       Off       Off

       3E0h       On       Off       Off       Off       Off       Off

       3F0h       Off      Off       Off       Off       Off       Off

            Note: A total of 64 base address settings are available. The
            switches are a binary representation of the decimal memory
            addresses. S1/6 is the Most Significant Bit and switch S1/1
            is the Least Significant Bit. The switches have the following
            decimal values: S1/6=512, S1/5=256, S1/4=128, S1/3=64,
            S1/2=32, S1/1=16. Turn off the switches and add the values of
            the switches that are off to obtain the correct memory
            address. (Off=1, On=0)

