
STALLION TECHNOLOGIES, INC.

EC 8/64-AT

Card Type              Serial
Processor              80186
Processor Speed        25MHz
Chipset                Cirrus Logic CL-CD1400 (on expansion box)
Maximum Onboard Memory 512KB RAM
I/O Options            Serial ports (64)
Data Bus               16-bit ISA
Card Size              Full height, half length

[Image]

                                CONNECTIONS

                Function                              Label

  Serial ports via DB-50 connector                     CN1

            Note:Standard RS-232 or RS-422 serial ports via DB-25 or
            RJ-45 connectors are provided on external expansion boxes.

                        USER CONFIGURABLE SETTINGS

                   Setting                      Label        Position

     Factory configured - do not alter         SW1/8           Off

                        BASE I/O ADDRESS SELECTIONS

  Setting     SW1/1   SW1/2    SW1/3    SW1/4    SW1/5    SW1/6    SW1/7

      000h     On       On       On       On       On      On        On

      004h     Off      On       On       On       On      On        On

      008h     On      Off       On       On       On      On        On

      00Ch     Off     Off       On       On       On      On        On

      010h     On       On      Off       On       On      On        On

     2A0h     On       On       On      Off       On      Off       On

      3ECh     Off     Off       On      Off      Off      Off      Off

      3F0h     On       On      Off      Off      Off      Off      Off

      3F4h     Off      On      Off      Off      Off      Off      Off

      3F8h     On      Off      Off      Off      Off      Off      Off

      3FCh     Off     Off      Off      Off      Off      Off      Off

            Note: A total of 128 base address settings are available. The
            switches are a binary representation of the decimal memory
            addresses. SW1/7 is the Most Significant Bit and switch SW1/1
            is the Least Significant Bit. The switches have the following
            decimal values: SW1/7=256, SW1/6=128, SW1/5=64, SW1/4=32,
            SW1/3=16, SW1/2=8, SW1/1=4. Turn off the switches and add the
            values of the switches that are off to obtain the correct
            memory address. (Off=1, On=0)

