
INDUSTRIAL COMPUTER SOURCE

COMM4AT

Card Type               Multi-I/O card
Chip Set                Unidentified
Maximum Onboard Memory  Unidentified
I/O Options             Serial ports (4 RS-232)
Hard Drives supported   None
Floppy drives supported None
Data Bus                16-bit ISA
Card Size               Half-length

[Image]

                                CONNECTIONS

                      Function                               Label

  37-pin octopus connector to four 25-pin RS-232              CN1
  ports

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  Multiple interrupt enabled                     E1         Pins 3 & 4
                                                              closed

  Anti-lockup feature enabled                    E1         Pins 1 & 2
                                                              closed

                        BASE I/O ADDRESS SELECTION

  Setting   SW1/1   SW1/2   SW1/3   SW1/4   SW1/5   SW1/6   SW1/7   SW1/8

   000h      On      On      On      On      On      On      On      On

   020h      On      On      On      On      On      On      On      Off

   040h      On      On      On      On      On      On     Off      On

   060h      On      On      On      On      On      On     Off      Off

   080h      On      On      On      On      On     Off      On      On

  1F60h     Off     Off     Off     Off     Off      On     Off      Off

  1F80h     Off     Off     Off     Off     Off     Off      On      On

  1FA0h     Off     Off     Off     Off     Off     Off      On      Off

  1FC0h     Off     Off     Off     Off     Off     Off     Off      On

  1FE0h     Off     Off     Off     Off     Off     Off     Off      Off

                                   Note:

  A total of 256 base address settings are available. The jumpers are a
  binary representation of the decimal memory addresses. SW1/1 is the
  Most Significant Bit and jumper SW1/8 is the Least Significant Bit. The
  jumpers have the following decimal values: SW1/1=4096, SW1/2=2048,
  SW1/3=1024, SW1/4=512, SW1/5=256, SW1/6=128, SW1/7=64, SW1/8=32. Turn
  off the switches and add the values of the switches to obtain the
  correct memory address. (Off=1, On=0)

                      SERIAL PORT INTERRUPT SELECTION

                 IRQ                                Position

                   IRQ2                      E1/pins 23 & 24 closed

                  IRQ3                      E1/pins 21 & 22 closed

                   IRQ4                      E1/pins 19 & 20 closed

                   IRQ5                      E1/pins 17 & 18 closed

                   IRQ6                      E1/pins 15 & 16 closed

                   IRQ7                      E1/pins 13 & 14 closed

                   IRQ10                     E1/pins 11 & 12 closed

                   IRQ11                      E1/pins 9 & 10 closed

                   IRQ12                      E1/pins 7 & 8 closed

                   IRQ15                      E1/pins 5 & 6 closed

