
AMERICAN DATA AQUISITION CORPORATION

5508LC REV. 1-USI=3

Card Type               Data Aquisition
Chip Set                Unidentified
Maximum Onboard Memory  Unidentified
I/O Options             Analog input, digital input
Hard Drives supported   None
Floppy drives supported None
Data Bus                8-bit ISA
Card Size               Half length

[Image]

                                CONNECTIONS

          Function             Label           Function           Label

  37-pin analog/digital          J1      A/D converter range        P2
  signals connector                      selector

  Bipolar offset selector        P1      Unipolar offset            P3
                                         selector

                              GAIN SELECTION

               Function                       W1                W2

     Programmable gain options: x1,         Open              Open
      x2, x5, x10

      Programmable gain options: x1,        Closed            Closed
      x2, x4, x8

                           DMA CHANNEL SELECTION

    Channel       JP6/A     JP6/B     JP6/C    JP7/A     JP7/B     JP7/C

     Disabled     Open      Open     Open      Open     Open      Open

         1        Closed     Open     Open     Closed    Open      Open

         2         Open     Closed    Open      Open     Closed    Open

         3             Open  Open     Closed    Open     Open     Closed

                            A/D RANGE SELECTION

       Polarity            Voltage            JP1               JP2

         Bipolar            + 5V          Pins 2 & 3        Pins 1 & 2
                                             closed           closed

         Unipolar           +0-10V         Pins 1 & 2        Pins 1 & 2
                                             closed           closed

          Bipolar           + 10V          Pins 2 & 3        Pins 2 & 3
                                             closed           closed

                        BASE I/O ADDRESS SELECTION

     Setting         Z10/1      Z10/2      Z10/3      Z10/4       Z10/5

         000h         Off        Off        Off        Off         Off

         020h         Off        Off        Off        Off         On

         040h         Off        Off        Off         On         Off

         060h         Off        Off        Off         On         On

         080h         Off        Off         On        Off         Off

        120h         Off         On        Off        Off         On

         360h          On         On        Off         On         On

         380h          On         On         On        Off         Off

         3A0h          On         On         On        Off         On

         3C0h          On         On         On         On         Off

         3E0h          On         On         On         On         On

                                   Note:

  A total of 32 base address settings are available. The switches are a
  binary representation of the decimal memory addresses. Z10/1 is the
  Most Significant Bit and switch Z10/5 is the Least Significant Bit. The
  switches have the following decimal values: Z10/1=512, Z10/2=256,
  Z10/3=128, Z10/4=64, Z10/5=32. Turn off the switches and add the values
  of the switches to obtain the correct memory address. (On=1, Off=0)

                          IRQ INTERRUPT SELECTION

         IRQ                 JP3              JP4               JP5

       Disabled             Open              Open             Open

         IRQ2               Open              Open           Pins 2 & 3
                                                              closed

         IRQ3               Open           Pins 2 & 3          Open
                                             closed

         IRQ4             Pins 2 & 3          Open             Open
                           closed

         IRQ5               Open              Open           Pins 1 & 2
                                                              closed

         IRQ6               Open           Pins 1 & 2          Open
                                             closed

         IRQ7             Pins 1 & 2               Open        Open
                           closed

             MISCELLANEOUS TECHNICAL NOTES

  Exact location of jumpers W1 & W2 is unidentified.

