
DIAMOND FLOWER, INC.

MIO-400KF REV G+

Card Type                  Multi-I/O card
Chip Set                   Unidentified
Maximum Onboard Memory     Unidentified
I/O Options                Floppy drive interface, game port, IDE
                           interface, SCSI connector, parallel port,
                           serial ports (2 RS-232)
Hard Drives supported      Two IDE (AT) drives
Floppy drives supported    Two 360KB or 720KB drives
Data Bus                   16-bit ISA
Card Size                  Half-length

[Image]

                                CONNECTIONS

         Function            Label            Function            Label

  34-pin cable connector      J2       IDE interface               J5
  - floppy drive

  Game port                   J3       9-pin serial port 1         J6

  10-pin serial port 2 -      J4       25 pin parallel port        J7
  internal

                        USER CONFIGURABLE SETTINGS

             Function                  Label             Position

     Factory configured - do not      JP3/H           Unidentified
      alter

     Game port enabled                JP3/I         Pins 2 & 3 closed

      Game port disabled               JP3/I         Pins 1 & 2 closed

                   FLOPPY DISK CONTROLLER CONFIGURATION

             Function                    JP3/F               JP3/G

  Floppy disk controller enabled       Pins 2 & 3      Pins 2 & 3 closed
                                         closed

  Floppy disk controller disabled      Pins 1 & 2      Pins 2 & 3 closed
                                         closed

                    PORT 1 DATA CARRIER DETECT SETTING

                Setting                               JP1/A

                DCD Normal                     Pins 1 & 2 closed

              DCD Forced true                   Pins 2 & 3 closed

                    PORT 2 DATA CARRIER DETECT SETTING

                Setting                               JP2/A

                DCD Normal                     Pins 1 & 2 closed

              DCD Forced true                   Pins 2 & 3 closed

                       PORT 1 DATA SET READY SETTING

                Setting                               JP1/B

                DSR Normal                     Pins 1 & 2 closed

              DSR Forced true                   Pins 2 & 3 closed

                       PORT 2 DATA SET READY SETTING

                Setting                               JP2/B

                DSR Normal                     Pins 1 & 2 closed

              DSR Forced true                   Pins 2 & 3 closed

                       PORT 1 CLEAR TO SEND SETTING

                Setting                               JP1/C

                CTS Normal                     Pins 1 & 2 closed

              CTS Forced true                   Pins 2 & 3 closed

                       PORT 2 CLEAR TO SEND SETTING

                Setting                               JP2/C

                CTS Normal                     Pins 1 & 2 closed

              CTS Forced true                   Pins 2 & 3 closed

                       PORT 1 DTE/DCE SELECTIONTION

               Setting                                JP5

                 DTE                   Pins 1 & 2. 3 & 4, 5 & 6, 7 & 8, 9
                                                  & 10 closed

                 DCE                   Pins 1 & 3, 2 & 4, 5 & 7, 6 & 8, 9
                                                  & 10 closed

                       PORT 2 DTE/DCE SELECTIONTION

               Setting                                JP4

                 DTE                   Pins 1 & 2. 3 & 4, 5 & 6, 7 & 8, 9
                                                  & 10 closed

                 DCE                   Pins 1 & 3, 2 & 4, 5 & 7, 6 & 8, 9
                                                  & 10 closed

               PARALLEL PORT ADDRESS SELECTION

       Setting              JP3/A                JP3/B

     LPT1 (3BCh)       Pins 1 & 2 closed   Pins 2 & 3 closed

     LPT2 (378h)       Pins 2 & 3 closed   Pins 2 & 3 closed

     LPT3 (287h)       Pins 2 & 3 closed   Pins 1 & 2 closed

      Disabled         Pins 1 & 2 closed   Pins 1 & 2 closed

                       SERIAL PORT ADDRESS SELECTION

    Port 1        Port 2        JP3/C      JP3/D      JP3/E        JP8

  COM1 (3F8h)   COM2 (2F8h)    Pins 2 &   Pins 2 &   Pins 2 &    Pins 1 &
                                  3          3          3       2, 4 & 5

  COM2 (2F8h)   COM3 (3E8h)    Pins 2 &   Pins 2 &   Pins 1 &    Pins 2 &
                                  3          3          2       3, 5 & 6

  COM1 (3F8h)   COM4 (2E8h)    Pins 2 &   Pins 2 &   Pins 2 &    Pins 1 &
                                  3          3          3       2, 5 & 6

  COM3 (3E8h)   COM4 (2E8h)    Pins 2 &   Pins 2 &   Pins 2 &    Pins 2 &
                                  3          3          3       3, 4 & 5

  COM1 (3F8h)    Disabled      Pins 2 &   Pins 1 &   Pins 2 &    Pins 1 &
                                  3          2          3       2, 4 & 5

   Disabled     COM2 (2F8h)    Pins 1 &   Pins 2 &   Pins 2 &    Pins 1 &
                                  2          3          3       2, 4 & 5

   Disabled      Disabled      Pins 1 &   Pins 1 &   Pins 1 &    Pins 1 &
                                  2          2          2       2, 4 & 5

  Note: Pins designated are in the closed position.

                     COM 1 & COM 3 INTERRUPT SELECTION

             IRQ                                  JP10

               IRQ2                        Pins 1 & 2 closed

               IRQ3                        Pins 7 & 8 closed

              IRQ4                        Pins 5 & 6 closed

               IRQ5                        Pins 3 & 4 closed

                     COM 2 & COM 4 INTERRUPT SELECTION

             IRQ                                  JP9

               IRQ2                        Pins 1 & 2 closed

              IRQ3                        Pins 7 & 8 closed

               IRQ4                        Pins 5 & 6 closed

               IRQ5                        Pins 3 & 4 closed

                     PARALLEL PORT INTERRUPT SELECTION

             IRQ                                  JP11

               IRQ5                        Pins 1 & 2 closed

              IRQ7                        Pins 3 & 4 closed

