
ADVANTECH CO., LTD

PCL-728

Card Type               Analog output card
Chip Set                Unidentified
Maximum Onboard Memory  Unidentified
I/O Options             9-pin serial ports (2 RS-232)
Hard Drives supported   None
Floppy drives supported None
Data Bus                8-bit ISA
Card Size               Half-length, half-height card

[Image]

                                CONNECTIONS

          Function             Label           Function             Label

  9-pin serial port 1          CN1     9-pin serial port 2          CN2

                        CHANNEL 1 SOURCE SELECTION

                 Setting                                JP4

         Internal reference source              Pins 3 & 4 closed

          External reference source              Pins 1 & 2 closed

                        CHANNEL 2 SOURCE SELECTION

                 Setting                                JP8

         Internal reference source              Pins 3 & 4 closed

          External reference source              Pins 1 & 2 closed

                   CHANNEL 1 INTERNAL VOLTAGE SELECTION

                 Setting                                JP3

            -5V reference source                Pins 3 & 4 closed

            -10V reference source                Pins 1 & 2 closed

                   CHANNEL 2 INTERNAL VOLTAGE SELECTION

                 Setting                                JP3

            -5V reference source                Pins 3 & 4 closed

            -10V reference source                Pins 1 & 2 closed

                    CHANNEL 1 POLARITY OUTPUT SELECTION

           Setting                    JP1                    JP5

        Unipolar output       Pins 1 & 2 closed      Pins 1 & 2 closed
             enabled

          Bipolar output       Pins 2 & 3 closed      Pins 2 & 3 closed
             enabled

                    CHANNEL 2 POLARITY OUTPUT SELECTION

           Setting                    JP2                    JP9

        Unipolar output       Pins 1 & 2 closed      Pins 1 & 2 closed
             enabled

          Bipolar output       Pins 2 & 3 closed      Pins 2 & 3 closed
             enabled

                  CHANNEL 1 CURRENT SINK RANGE SELECTION

                  Range                                 JP6

             4 - 20mA enabled               Pins 3 & 5, 4 & 6 closed

              0 - 20mA enabled               Pins 1 & 3, 2 & 4 closed

                  CHANNEL 2 CURRENT SINK RANGE SELECTION

                  Range                                JP10

             4 - 20mA enabled               Pins 3 & 5, 4 & 6 closed

              0 - 20mA enabled               Pins 1 & 3, 2 & 4 closed

                        BASE I/O ADDRESS SELECTION

  Setting   SW1/1   SW1/2   SW1/3   SW1/4   SW1/5   SW1/6   SW1/7   SW1/8

      200h   Off     On      On      On      On      On      On      On

      204h   Off     On      On      On      On      On      On     Off

      208h   Off     On      On      On      On      On     Off      On

      20Ch   Off     On      On      On      On      On     Off     Off

      210h   Off     On      On      On      On     Off      On      On

     300h   Off     Off     On      On      On      On      On      On

      3E0h   Off     Off     Off     Off    Off      On      On      On

      3E4h   Off     Off     Off     Off    Off      On      On     Off

      3E8h   Off     Off     Off     Off    Off      On     Off      On

      3ECh   Off     Off     Off     Off    Off      On     Off     Off

      3FOh   Off     Off     Off     Off    Off     Off      On      On

                                   Note:

  A total of 125 valid base address settings are available. The switches
  are a binary representation of the decimal memory addresses. SW1/8 is
  the Least Significant Bit and switch SW1/1 is the Most Significant Bit.
  The switches have the following decimal values: SW1/1=512, SW1/2=256,
  SW1/3=128, SW1/4=64, SW1/5=32, SW1/6=16, SW1/7=8, SW1/8=4. Turn off the
  switches and add the values of the switches to obtain the correct
  memory address. (Off=1, On=0)

