
INDUSTRIAL COMPUTER SOURCE

16REL-L

Card Type   Parallel card
I/O Options serial port
Data Bus    8-bit ISA

[Image]

             CONNECTIONS

     Function            Label

  DB-37 connector         CN1

              USER CONFIGURABLE SETTINGS: PORT ENABLE/DISABLE

                    Setting                       Label      Position

  16REL-L port enabled                            SW1/8         On

  16REL-L port disabled                           SW1/8         Off

                        BASE I/O ADDRESS SELECTION

  Address   Address  SW1/1   SW1/2   SW1/3   SW1/4   SW1/5   SW1/6   SW1/7
  Port A    Port B

     300    303      Off     On      On      On      On      On      On

      304    307      Off     On      On      On      On      On     Off

      308    30F      Off     On      On      On      On     Off      On

      310    313      Off     On      On      On     Off      On      On

      314    317      Off     On      On      On     Off      On     Off

      320    323      Off     On      On      On     Off      On      On

      3A0    3A3      Off     Off     On      Off     On      On      On

                                   Note:

  A total of 255 base address settings are available. The switches are a
  binary representation of the decimal memory addresses. SW1/1 is the Most
  Significant Bit and switch SW1/8 is the Least Significant Bit. The
  switches have the following decimal values: SW1/1=256, SW1/2=128,
  SW1/3=64, SW1/4=32, SW1/5=16, SW1/6=8, SW1/7=4. Turn off the switches
  and add the values of the switches, including an additional value of 512
  as a fixed setting, to obtain the correct memory address. (Off=1, On=0)

                       MISCELLANEOUS TECHNICAL NOTES

   An optional cable is required to bring out the B side of the switches
  to another 37-pin connector (Port B).

   The 16REL-L can be installed into any PC expansion slot, except the
  J8 slot on the original IBM XT and Portable.

