
INDUSTRIAL COMPUTER SOURCE

AOB2-P

Card Type    Analog to digital converter
I/O Options  parallel port
Data Bus     8-bit ISA

[Image]

              CONNECTIONS

      Function             Label

  25-pin connector          J1

                          OUTPUT RANGE SELECTION

              Function                       S2                 S3

  0V - +5V                               Pins 1 & 2         Pins 1 & 2
                                           closed             closed

  0V - +10V                              Pins 2 & 3         Pins 2 & 3
                                           closed             closed

  -5V - +5V                              Pins 1 & 2         Pins 1 & 2
                                           closed             closed

  -10V - +10V                            Pins 2 & 3         Pins 2 & 3
                                           closed             closed

  +mA - 20mA                             Pins 1 & 2         Pins 1 & 2
                                           closed             closed

  Note: Output range may be alternatively be selected using the I/O
  connector whose location is unidentified.

                        BASE I/O ADDRESS SELECTION

   Setting     S2/1     S2/2     S2/3     S2/4    S2/5     S2/6     S2/7

      000h      On       On       On       On      On       On       On

      018h     Off      Off       On       On      On       On       On

      038h     Off      Off      Off       On      On       On       Off

      100h      On       On       On       On      On       Off      On

      200h      On       On       On       On      On       On       Off

      300h     On       On       On       On      On       Off      Off

      380h      On       On       On       On      Off      Off      Off

      3C0h      On       On       On      Off      Off      Off      Off

      3E0h      On       On      Off      Off      Off      Off      Off

      3F0h      On      Off      Off      Off      Off      Off      Off

      3F8h     Off      Off      Off      Off      Off      Off      Off

                                   Note:

  A total of 128 base address settings are available. The switches are a
  binary representation of the decimal memory addresses. S2/7 is the Most
  Significant Bit and switch S2/1 is the Least Significant Bit. The
  switches have the following decimal values: S2/7=512, S2/6=256,
  S2/5=128, S2/4=64, S2/3=32, S2/2=16, S2/1=8. Turn off the switches and
  add the values of the switches to obtain the correct memory address.
  (Off=1, On=0)

                       MISCELLANEOUS TECHNICAL NOTES

            Pin 1 placements for S2 and S3 may vary on your card, but the
            orientation remains the same.

