
KOUWELL ELECTRONIC CORPORATION

KW-530C

Card Type               Floppy drive controller
Processor               8088/8086, 80286/80386
Processor Speed         Unidentified
Maximum Onboard Memory  Unidentified
Floppy drives supported 360KB, 720KB, 1.2MB, 1.44MB
Data Bus                8-bit ISA

[Image]

                           CONNECTIONS

            Function                         Location

  34-pin floppy drive connector                CN1

                   HIGH CAPACITY DRIVE CONTROL SELECTION

                  Function                      Label        Position

     High capacity drive control disabled       JP1          Closed

      High capacity drive control enabled        JP1           Open

  Note: For 8086/8088 based systems, the above jumper must be shorted
  regardless of drive capacity.

                        USER CONFIGURABLE SETTINGS

              Function                     Label            Position

  Floppy drive C and D in use for          SW1/1               On
  8088/8086 system

  Floppy drive C and D not in use          SW1/1              Off
  for 8088/8086 system

  Drive B is 360KB or 720KB                SW1/2               On

  Drive B is 1.2MB or 1.44MB               SW1/2              Off

  Drive A is 360KB or 720KB                SW1/3               On

  Drive A is 1.2MB or 1.44MB               SW1/3              Off

  Hard drive controller installed          SW1/4               On

  Hard drive controller not                SW1/4              Off
  installed

