
BROOKTROUT TECHNOLOGY INCORPORATED

TR114 PRE-900 SERIES ISA DIGITAL (2 channel board)

Card Type              Digital I/O card
Maximum Onboard Memory Unidentified
Boot ROM               Available
Data Bus               16-bit ISA

[Image]

                               CONNECTIONS

         Function           Label            Function            Label

  Serial debug connector     CN1      MVIP connector               J1

  C-bus connector            CN2      PEB connector                J2

  Control connector          CN3

                        USER CONFIGURABLE SETTINGS

                    Function                      Label      Position

  Only one, or the first TR114 in a system        SW1/1         On

  All other TR114 cards in a system               SW1/1         Off

                        BASE I/O ADDRESS SELECTION

  Setting     SW1/2   SW1/3    SW1/4    SW1/5    SW1/6    SW1/7    SW1/8

    100h       On       On       On       On       On      Off       On

    140h       On       On       On      Off       On      Off       On

    180h       On       On       On       On      Off      Off       On

    200h       On       On       On       On       On      On       Off

    220h       On       On      Off       On       On      On       Off

    240h       On       On       On      Off       On      On       Off

    260h       On       On      Off      Off       On      On       Off

    280h       On       On       On       On      Off      On       Off

    2A0h       On       On      Off       On      Off      On       Off

    2C0h       On       On       On      Off      Off      On       Off

                                   Note:

  A total of 255 base address settings are available. The switches are a
  binary representation of the decimal memory addresses. SW1/8 is the
  Most Significant Bit and switch SW1/1 is the Least Significant Bit. The
  switches have the following decimal values: SW1/8=32768, SW1/7=16384,
  SW1/6=8192, SW1/5=4096, SW1/4=2048, SW1/3=1024, SW1/2=512, SW1/1=256.
  Turn off the switches and add the values of the switches to obtain the
  correct memory address. (Off=1, On=0)

          INTERRUPT SELECTION

     IRQ             Jumper JP2

      3         Pins 1 & 2 are closed

      4         Pins 3 & 4 are closed

      5         Pins 5 & 6 are closed

      6         Pins 7 & 8 are closed

      7        Pins 9 & 10 are closed

      9        Pins 11 & 12 are closed

         INTERRUPT SELECTION

     IRQ            Jumper JP1

     10        Pins 9 & 10 are closed

     11        Pins 7 & 8 are closed

     12        Pins 5 & 6 are closed

     14        Pins 3 & 4 are closed

     15        Pins 1 & 2 are closed

                             DIAGNOSTIC LED(S)

   LED          Color           Status                Condition

   LED1     Unidentified       Blinking      Data is being transmitted on
                                                      channel 2

   LED1     Unidentified       Blinking         Channel 2 is off hook
                                (fast)

   LED2     Unidentified       Blinking      Data is being transmitted on
                                                      channel 1

   LED2     Unidentified       Blinking         Channel 1 is off hook
                                (fast)

               MVIP CLOCK TERMINATION

     Setting            SW2/1             SW2/2

    Terminated           On                On

  Not terminated         Off               Off

