
PACKARD BELL

286X PWB-2149 (FORCE 1/AXCEL 1+/

PB286N/LEGEND IV/PACK-MATE III)

Processor               80286
Processor Speed         12/16MHz
Chip Set                TI
Max. Onboard DRAM       4MB
Cache                   None
BIOS                    Phoenix
Dimensions              330mm x 218mm
I/O Options             Parallel port, serial ports (2), PS/2 mouse port,
                        floppy drive interface, IDE interface
NPU Options             80287

[Image]

                                CONNECTIONS

  Purpose                 Location      Purpose                Location

  Parallel port              J1         Reset switch          J11/pin 1

  Serial port (COM2)         J2         Turbo switch          J11/pin 2

  Serial port (COM1)         J3         Power ready           J11/pin 3

  PS/2 mouse port            J4         IDE LED               J11/pin 4

  Keyboard                   J5         Turbo LED             J11/pin 5

  Expansion slot card        J8         Ground                J11/pin 6

  IDE interface              J9         External battery         J12

  Floppy interface           J10

                        USER CONFIGURABLE SETTINGS

                Function                     Jumper          Position

     Monitor type select color                J7            pins 1 & 2
                                                              closed

      Monitor type select monochrome           J7         pins 1 & 2 open

     Floppy drive enabled                     J7            pins 3 & 4
                                                              closed

      Floppy drive disabled                    J7         pins 3 & 4 open

     IDE enabled                              J7            pins 5 & 6
                                                              closed

      IDE disabled                             J7         pins 5 & 6 open

     COM1 (J3) enabled                        J7            pins 7 & 8
                                                              closed

      COM1 (J3) disabled                       J7         pins 7 & 8 open

     COM2 (J2) enabled                        J7           pins 9 & 10
                                                              closed

      COM2 (J2) disabled                       J7           pins 9 & 10
                                                               open

     DRAM select 0 wait states                J14            Closed

      DRAM select 1 wait state                 J14             Open

     DRAM module type select 256K x 9         J15            Closed

      DRAM module type select 1M x 9           J15             Open

     384KB relocation enabled                 J16             Open

      384KB relocation disabled                J16            Closed

              DRAM CONFIGURATION

      Size          Bank 0          Bank 1

      1MB         (2) 256K x 9   (2) 256K x 9

      2MB         (2) 1M x 9         NONE

      4MB         (2) 1M x 9      (2) 1M x 9

               PARALLEL PORT IRQ CONFIGURATION

         IRQ                 J17                  J18

    LPT1 at IRQ7       pins 1 & 2 closed   pins 2 & 3 closed

    LPT2 at IRQ5       pins 2 & 3 closed   pins 1 & 2 closed

