
HYUNDAI ELECTRONICS, INC.

SUPER 286C (REV. A & B)

Processor           80286
Processor Speed     10MHz
Chip Set            VLSI
Max. Onboard DRAM   1MB
Cache               None
BIOS                Award
Dimensions          355mm x 304mm
I/O Options         Serial ports (2), parallel port, floppy drive interface
NPU Options         80287

[Image]

                                CONNECTIONS

  Purpose                   Location   Purpose                   Location

  Serial port                 J1A      External battery            J5

  Serial port                 J1B      Speaker                     J6

  Parallel port               J2       Power LED & keylock         J7

                        USER CONFIGURABLE SETTINGS

              Function                  Jumper/Switch         Position

     CPU speed select 10MHz                SW1/3               Off

      CPU speed select 8MHz                 SW1/3                On

     Monitor type select color             SW1/4               Off

      Monitor type select                   SW1/4                On
      monochrome

     Factory configured - do not            SW2             pins 1 & 2
      alter                                                    closed

     CS ROM                                 SW3             pins 1 & 2
                                                               closed

      XMEMR                                  SW3             pins 2 & 3
                                                               closed

     BIOS type select 27256                 SW4             pins 2 & 3
                                                               closed

      BIOS type select 27128                 SW4             pins 1 & 2
                                                               closed

     Floppy drive mode select               SW5             pins 1 & 2
      single speed                                             closed

      Floppy drive mode select               SW5             pins 2 & 3
      dual speed                                               closed

     COM1 enabled (IRQ4)                 SW6 & SW9            Closed

      COM1 disabled                       SW6 & SW9             Open

     COM2 enabled (IRQ3)                 SW7 & SW8            Closed

      COM2 disabled                       SW7 & SW8             Open

      Notes: The locations of SW2 & SW3 are unidentified. To install an
      internal modem as either COM1 or COM2, the PAL chip at U65 must be
      replaced with a SER1 U58EC chip. Hyundai no longer stocks this chip
      and there is no third party sources known. The location of U65 is
      unidentified.

           DRAM CONFIGURATION

     Size        Bank 0        Bank 1

    512KB       (18) 41256      NONE

    640KB       (18) 41256   (18) 4164

     1MB        (18) 41256   (18) 41256

           DRAM SWITCH CONFIGURATION

      Size        SW1/switch 1   SW1/switch 2

     512KB            Off             On

     640KB            On             Off

      1MB             Off            Off

