
QUALOGY, INC.

QPC-5132

Processor         80286
Processor Speed   8/10/12.5/16MHz
Chip Set          G2
Max. Onboard DRAM 4MB
SRAM Cache        NONE
BIOS              AMI
Dimensions        330mm x 120mm
I/O Options       Parallel port, serial ports (2-RS232, 1-RS422)
NPU Options       80287

[Image]

                                CONNECTIONS

  Purpose                   Location   Purpose                   Location

  Reset switch                J1       Serial port B (RS422)       J6

  Speaker                     J3       Serial port B (RS232)       J7

  Keylock                     J4       Serial port A (RS232)       J10

  Keyboard                    J5       Parallel port               J15

                        USER CONFIGURABLE SETTINGS

              Function                   Jumper/Switch

     Monitor type select color               J9                Open

      Monitor type select                     J9               Closed
      monochrome

     Parallel port enabled                   J12              Closed

      Parallel port disabled                  J12               Open

     BIOS type select 27256                  J24            pins 1 & 2
                                                               closed

      BIOS type select 27512                  J24            pins 2 & 3
                                                               closed

     RS232 12V from backplane                J99            pins 2 & 3
                                                               closed

      RS232 12V from card                     J99            pins 1 & 2
                                                               closed

     Bus speed select slow              SW1/switch 2           Off

      Bus speed select fast              SW1/switch 2            On

     CPU speed select OSC3              SW1/switch 5           Off

      CPU speed select OSC3              SW1/switch 5            On

                            DRAM CONFIGURATION

  Size     Bank 0    Bank 1    SW1/switch 1   SW1/switch 3   SW1/switch 4

  512KB      (2)      NONE         On             On             Off
            256K x
              9

   1MB       (2)       (2)         Off            On             Off
            256K x   256K x
              9        9

   2MB      (2) 1M    NONE         Off            Off             On
             x 9

   4MB      (2) 1M   (2) 1M        Off            Off            Off
             x 9      x 9

                            SERIAL PORT CONFIGURATION

   RS422      RS232      RS232      J8      J11      J13      J14     J18    J19
   (J6)       (J7)      (J10)

  Disabled    COM2       COM1     Closed   Closed   Closed   Closed   pins   pins
                                                                      1&2    1&2

   COM2      Disabled    COM1      Open    Closed   Closed   Closed   pins   pins
                                                                      1&2    1&2

  Disabled    COM1       COM2     Closed   Closed   Closed   Open     pins   pins
                                                                      2&3    2&3

   COM1      Disabled    COM2      Open    Closed   Closed   Open     pins   pins
                                                                      2&3    2&3

  Disabled   Disabled  Disabled    N/A      Open     Open     N/A     N/A    N/A

  Note:Serial port B is configurable as either a RS422 port using J6 or a RS232
  port using J7,

  but both connectors (J6 & J7) cannot be active at the same time.

  Pins designated should be in the closed position.

                     MEMORY WAIT STATES CONFIGURATION

   Wait state      CPU Speed      J16        J17        J20        J21

  0 wait states                pins 1 &   pins 1 &   pins 1 &   pins 1 &
                                   2          2          2          2

  1 wait state                 pins 2 &   pins 2 &   pins 2 &   pins 2 &
                                   3          3          3          3

  1 wait state       16MHz      pins 2 &   pins 1 &   pins 2 &   pins 2 &
                                   3          2          3          3

  Note: Pins designated should be in the closed position

