
PACKARD BELL

386-33

Processor          80386DX
Processor Speed    33MHz
Chip Set           Intel
Max. Onboard DRAM  8MB
SRAM Cache         None
BIOS               Phoenix
Dimensions         355mm x 304mm
I/O Options        32-bit expansion slots (2), parallel port, serial ports
                   (2)
NPU Options        80387DX

[Image]

                                CONNECTIONS

  Purpose               Location      Purpose                 Location

  Parallel port           J13A        Reset switch              J23B

  Serial port 1 (9   J13B/pins 1-10   Speaker                   J23C
  pin)

  Serial port 2 (9      J13B/pins     Power LED &               J23D
  pin)                   11-20        keylock

  Serial port 2           J13C        32-bit expansion        S1 & S2
  (25 pin)                            slots

  Reserved for            J23A
  future use

            Note:J13C is a 25 pin version of serial port 2 (J13B pins
            11-20). Either connector may be used, but not both.

                        USER CONFIGURABLE SETTINGS

                Function                     Jumper          Position

     Monitor type select color                JP5           pins 2 & 3
                                                              closed

      Monitor type select monochrome           JP5           pins 1 & 2
                                                              closed

     Keyboard reset disabled                  JP6           pins 2 & 3
                                                              closed

      Keyboard reset enabled                   JP6           pins 1 & 2
                                                              closed

     NPU disabled                             JP7           pins 2 & 3
                                                              closed

      NPU enabled                              JP7           pins 1 & 2
                                                              closed

     Printer acknowledge trailing edge        JP8           pins 2 & 3
                                                              closed

      Printer acknowledge leading edge         JP8           pins 1 & 2
                                                              closed

     BIOS type select 2764                    JP9           pins 1 & 2
                                                              closed

      BIOS type select 27128                   JP9           pins 2 & 3
                                                              closed

     Factory configured - do not alter       JP16             Open

               SERIAL PORT 1 (J13B/PINS 1-10) CONFIGURATION

                  Mode                                  JP3

              Enabled (COM1)                    pins 1 & 2 closed

                  Disabled                       pins 2 & 3 closed

           SERIAL PORT 2 (J13B/PINS 11-20 OR J13C) CONFIGURATION

                  Mode                                  JP4

              Enabled (COM2)                    pins 1 & 2 closed

                  Disabled                       pins 2 & 3 closed

                    PARALLEL PORT (J13A) CONFIGURATION

             LPT                      JP1                    JP2

             LPT1             pins 1 & 2 closed      pins 2 & 3 closed

              LPT2             pins 2 & 3 closed      pins 1 & 2 closed

            Disabled           pins 2 & 3 closed      pins 2 & 3 closed

                            DRAM CONFIGURATION

   Size     Bank 0    Bank 1      JP11        JP12       JP14      JP15

   1MB        (4)      NONE       Open        Open      pins 1   pins 1 &
            256K x                                       & 2        2
              9

   2MB        (4)       (4)      Closed       Open      pins 1   pins 1 &
            256K x     256K x                            & 2        2
              9          9

   4MB      (4) 1M     NONE       Open       Closed     pins 2   pins 2 &
             x 9                                         & 3        3

   8MB      (4) 1M     (4) 1M    Closed      Closed     pins 2   pins 2 &
             x 9        x 9                              & 3        3

  Note:Pins designated should be in the closed position.

                          RAM TYPE CONFIGURATION

            Type                      JP10                   JP13

             RAS/CAS                  Open                   Open

          Fast Paged                Closed                 Closed

          Static Column               Open                  Closed

