
MYLEX CORPORATION

MPE-PNTM

Processor              Pentium
Processor Speed        60/66MHz
Chip Set               Mercury
Max. onboard DRAM      192MB
Cache                  256/512KB
BIOS                   AMI
Dimensions             356mm x 304mm
I/O Options            32-bit PCI local bus slots (3), floppy drive
                       interface, IDE interface,

                       parallel port, serial ports (2)
NPU Options            None

[Image]

                                CONNECTIONS

  Purpose                  Location    Purpose                  Location

  Reset switch                J4       Internal keyboard          J17
                                       connector

  Power LED & keylock         J5       Chassis fan power          J18

  Speaker                     J6       SCSI connector             J20

  IDE interface               J9       IDE interface LED          J22

  Serial port 1              J13       32-bit PCI local bus        S1
                                       slot

  Serial port 2              J14       32-bit PCI local bus        S2
                                       slot

  Parallel port              J15       32-bit PCI local bus        S3
                                       slot

  Floppy drive               J16       Cache SIMM module          U60
  interface

                        USER CONFIGURABLE SETTINGS

                Function                     Jumper          Position

     IDE DMA disabled                         J1              Open

      IDE DMA on channel 6                     J1             Closed

     Factory configured - do not alter        J2              Open

     Monitor type select color                J3             Closed

      Monitor type select monochrome           J3              Open

     Factory configured - do not alter        J7              Open

     Factory configured - do not alter        J8            Pins 2 & 3
                                                              closed

     Factory configured - do not alter        J11             Open

     Factory configured - do not alter        J12             Open

     Write-back cache enabled                 J19             Open

      Write-thru cache enabled                 J19            Closed

     Factory configured - do not alter        J26             Open

     Standard asynchronous SRAM               J28           Pins 1 & 2
                                                              closed

      Burst synchronous SRAM                   J28           Pins 2 & 3
                                                              closed

     Factory configured - do not alter        J29             Open

     Cache parity support disabled            J30         Pins 1 & 2 and
                                                               3 & 4

      Cache parity support enabled             J30         Pins 1 & 3 and
                                                               2 & 4

  Note: Pins designated should be in the closed position.

                        DRAM CONFIGURATION

      Size            Bank 0           Bank 1          Bank 2

       2MB        (2) 256K x 36         NONE            NONE

       4MB        (2) 256K x 36    (2) 256K x 36        NONE

       6MB        (2) 256K x 36    (2) 256K x 36    (2) 256K x 36

       8MB         (2) 1M x 36          NONE            NONE

      10MB         (2) 1M x 36     (2) 256K x 36        NONE

      12MB         (2) 1M x 36     (2) 256K x 36    (2) 256K x 36

      16MB         (2) 1M x 36      (2) 1M x 36         NONE

      16MB         (2) 2M x 36          NONE            NONE

      18MB         (2) 1M x 36      (2) 1M x 36     (2) 256K x 36

      18MB         (2) 2M x 36     (2) 256K x 36        NONE

      20MB         (2) 2M x 36     (2) 256K x 36    (2) 256K x 36

      24MB         (2) 1M x 36      (2) 1M x 36      (2) 1M x 36

      24MB         (2) 2M x 36      (2) 1M x 36         NONE

                        DRAM CONFIGURATION

      Size            Bank 0           Bank 1          Bank 2

      32MB         (2) 4M x 36          NONE            NONE

      32MB         (2) 2M x 36      (2) 1M x 36      (2) 1M x 36

      32MB         (2) 2M x 36      (2) 2M x 36         NONE

      34MB         (2) 4M x 36     (2) 256K x 36        NONE

      40MB         (2) 2M x 36      (2) 2M x 36      (2) 1M x 36

      40MB         (2) 4M x 36      (2) 1M x 36         NONE

      48MB         (2) 4M x 36      (2) 2M x 36         NONE

      48MB         (2) 2M x 36      (2) 2M x 36      (2) 2M x 36

      64MB         (2) 4M x 36      (2) 4M x 36         NONE

      64MB         (2) 2M x 36      (2) 2M x 36      (2) 2M x 36

      64MB         (2) 8M x 36          NONE            NONE

      66MB         (2) 8M x 36     (2) 256K x 36        NONE

      68MB         (2) 8M x 36     (2) 256K x 36    (2) 256K x 36

      72MB         (2) 8M x 36      (2) 1M x 36         NONE

      80MB         (2) 8M x 36      (2) 1M x 36      (2) 1M x 36

      80MB         (2) 8M x 36      (2) 2M x 36         NONE

      96MB         (2) 8M x 36      (2) 2M x 36      (2) 2M x 36

      96MB         (2) 8M x 36      (2) 4M x 36         NONE

      98MB         (2) 8M x 36      (2) 4M x 36     (2) 256K x 36

      104MB        (2) 8M x 36      (2) 4M x 36      (2) 1M x 36

      114MB        (2) 8M x 36      (2) 4M x 36      (2) 2M x 36

      128MB        (2) 8M x 36      (2) 4M x 36      (2) 4M x 36

      128MB        (2) 8M x 36      (2) 8M x 36         NONE

      196MB        (2) 8M x 36      (2) 8M x 36      (2) 8M x 36

                        CACHE JUMPER CONFIGURATION

           Size                      J25                     J27

             0KB             Pins 1 & 2 closed       Pins 1 & 2 closed

             256KB            Pins 1 & 2 closed       Pins 2 & 3 closed

             512KB            Pins 2 & 3 closed       Pins 2 & 3 closed

                       SCSI INTERFACE CONFIGURATION

      Bus Power         Termination            J23               J24

       Internal          Internal            Closed            Open

        External          External            Closed            Open

  Note:When SCSI cable is connected, J23 and J24 should be closed.

