
ICL

ERGOPRO C3/33

Processor              80386SX
Processor Speed        33MHz
Chip Set               TI
Max. Onboard DRAM      16MB
Cache                  None
BIOS                   ICL
Dimensions             430mm x 352mm
I/O Options            PS/2 mouse port, parallel port, serial port, VGA
                       port, floppy drive interface, IDE interface, riser
                       slot
NPU Options            80378SX

[Image]

                                CONNECTIONS

  Purpose                   Location   Purpose                   Location

  VGA port                    CN1      Floppy drive interface      CN6

  PS/2 mouse port             CN2      Reset switch                J3

  Parallel port               CN3      Chassis fan power           J4

  Serial port                 CN4      IDE interface LED           J5

  IDE interface               CN5      Riser Card                  SL1

                        USER CONFIGURABLE SETTINGS

                Function                    Jumper           Position

     On board VGA enabled                    J1            pins 2 & 3
                                                              closed

      On board VGA disabled                   J1            pins 1 & 2
                                                              closed

     CMOS memory normal operation            J2            pins 1 & 2
                                                              closed

      CMOS memory clear                       J2            pins 2 & 3
                                                              closed

           DRAM CONFIGURATION

     Size        Bank 0        Bank 1

     2MB        (2) 1M x 9      NONE

     4MB        (2) 1M x 9   (2) 1M x 9

     8MB        (2) 4M x 9      NONE

     16MB       (2) 4M x 9   (2) 4M x 9

                     VRAM CONFIGURATION

             Size                         Bank 0

            512KB                      (4) 256K x 4

  Note:VRAM is factory installed and is not configurable.

