
ICL

TEAMSERVER EI SERIES

Processor   80486SX/80487SX/80486DX/ODP486SX/80486DX2/Pentium
            Overdrive/Pentium (depends on CPU card installed)
Processor   25/33/40/50(internal)/50/60/66(internal)/66/80(internal)MHz
Speed       (depends on CPU card installed)
Chip Set    OPTI
Max.        256MB (depends on CPU card installed)
Onboard
DRAM
Cache       64/128/256/1024KB (depends on CPU card installed)
BIOS        Unidentified
Dimensions  330mm x 218mm
I/O Options PS/2 mouse port, parallel port, serial ports (2), floppy drive
            interface, IDE interface, CPU slot, 32-bit VESA local bus slots
            (2)
NPU Options None

[Image]

                                CONNECTIONS

  Purpose               Location     Purpose                    Location

  PS/2 mouse port          CN1       IDE interface LED             J3

  Parallel port            CN2       Power on LED                  J5

  Serial port 1            CN3       Speaker (not used)            J6

  Serial port 2            CN4       Keyboard/mouse                J7
                                     connector (not used)

  Floppy drive             CN5       Reset switch                 JP7
  interface

  IDE interface            CN6       32-bit VESA local bus     SL1 & SL2
                                     slots

  Chassis fan power        J1        CPU slot                     SL3

  CPU fan power            J2

                        USER CONFIGURABLE SETTINGS

                Function                     Jumper          Position

     Factory configured - do not             JP5             Closed
      alter

     Security disabled                       JP6           pins 1 & 2
                                                              closed

      Security enabled                        JP6           pins 2 & 3
                                                              closed

     Speaker type select internal            JP9           pins 2 & 3
                                                              closed

      Speaker type select external            JP9           pins 1 & 2
                                                              closed

  Note: To clear CMOS memory, remove jumper on JP6. Connect middle pin on
  JP6 to pin 2 on CN2.

           DRAM CONFIGURATION (E180I CPU BOARD INSTALLED ONLY)

     Size         Bank 0         Bank 1         Bank 2        Bank 3

     16MB       (1) 1M x 36   (1) 1M x 36    (1) 1M x 36    (1) 1M x 36

     16MB       (1) 4M x 36       NONE           NONE          NONE

     20MB       (1) 1M x 36   (1) 4M x 36        NONE          NONE

     24MB       (1) 1M x 36   (1) 1M x 36    (1) 4M x 36       NONE

     28MB       (1) 1M x 36   (1) 1M x 36    (1) 1M x 36    (1) 4M x 36

     32MB       (1) 4M x 36   (1) 4M x 36        NONE          NONE

     36MB       (1) 1M x 36   (1) 4M x 36    (1) 4M x 36       NONE

     40MB       (1) 1M x 36   (1) 1M x 36    (1) 4M x 36    (1) 4M x 36

     48MB       (1) 4M x 36   (1) 4M x 36    (1) 4M x 36       NONE

     52MB       (1) 1M x 36   (1) 4M x 36    (1) 4M x 36    (1) 4M x 36

     64MB       (1) 4M x 36   (1) 4M x 36    (1) 4M x 36    (1) 4M x 36

      DRAM CONFIGURATION (E380I/E430I/E480I CPU BOARD INSTALLED ONLY)

          Size                    Bank 0                   Bank 1

          16MB                 (2) 1M x 36              (2) 1M x 36

          16MB                 (2) 2M x 36                  NONE

          24MB                 (2) 1M x 36              (2) 2M x 36

          32MB                 (2) 2M x 36              (2) 2M x 36

          32MB                 (2) 4M x 36                  NONE

          40MB                 (2) 1M x 36              (2) 4M x 36

          48MB                 (2) 2M x 36              (2) 4M x 36

          64MB                 (2) 4M x 36              (2) 4M x 36

          64MB                 (2) 8M x 36                  NONE

          72MB                 (2) 1M x 36              (2) 8M x 36

          80MB                 (2) 2M x 36              (2) 8M x 36

          96MB                 (2) 4M x 36              (2) 8M x 36

          128MB                (2) 8M x 36              (2) 8M x 36

            Note: If one of the above CPU boards are installed, Bank 0 =
            Banks 1 & 2 and Bank 1 = 2 & 3 on the mainboard.

                            CMOS CONFIGURATION

      Type           JP10          JP11           JP12           JP13

     Dallas        pins 1 & 2    pins 1 & 2    pins 1 & 2     pins 1 & 2
                    closed        closed         closed         closed

   Benchmark       pins 2 & 3    pins 2 & 3    pins 2 & 3     pins 2 & 3
                    closed        closed         closed         closed

      VESA WAIT STATE CONFIGURATION

     Wait states             JP3

    0 wait states     pins 2 & 3 closed

    1 wait state      pins 1 & 2 closed

         BUS SPEED CONFIGURATION

      CPU speed              JP4

      <= 33MHz        pins 2 & 3 closed

       > 33MHz        pins 1 & 2 closed

    ON BOARD SCSI CONFIGURATION

  Setting       JP1        JP2

  Disabled    Closed      Closed

  Enabled      Open        Open

                        ON BOARD SCSI CONFIGURATION

  Note: Mainboard has a mix of EIAS and ISA slots. The location of the
  EISA slots are unidentified.

[Image]

                        USER CONFIGURABLE SETTINGS

                Function                     Jumper          Position

     LADS setting for VESA local bus         JP3           pins 1 & 2
      33MHz                                                   closed

      LADS setting for VESA local bus         JP3           pins 2 & 3
      50MHz                                                   closed

     Local bus enabled                       JP10          pins 2 & 3
                                                              closed

      Local bus disabled                      JP10          pins 1 & 2
                                                              closed

     Factory configured - do not             JP15             N/A
      alter

     Factory configured - do not             JP16             N/A
      alter

     Factory configured - do not             JP17             N/A
      alter

                    CACHE CONFIGURATION

     Size          Bank 0         Bank 1          TAG

     64KB        (4) 8K x 8     (4) 8K x 8    (1) 8K x 8

     128KB      (4) 32K x 8        NONE       (1) 8K x 8

     256KB      (4) 32K x 8    (4) 32K x 8    (1) 32K x 8

                        CACHE JUMPER CONFIGURATION

  Size     JP11     JP12      JP13     JP14      JP18     JP19     JP20

  None     Open     Open      Open     Open      Open     Open     Open

  64KB     Closed   Open      Open     Open      Open    Closed    Open

  128KB    Closed   Closed    Open     Open      Open    Closed    Closed

  256KB    Closed   Closed   Closed    Closed   Closed   Closed    Closed

  Note: Pins designated should be in the closed position.

          CPU TYPE CONFIGURATION

        Type                  JP4

       80486SX         pins 1 & 2 closed

      ODP486SX         pins 2 & 3 closed

       80487SX         pins 2 & 3 closed

       80486DX                Open

      80486DX2         pins 2 & 3 closed

  Pentium Overdrive           Open

                          CPU SPEED CONFIGURATION

    Speed           JP1           JP2            JP8             JP9

    25MHz          Open           Open        pins 1 & 2      pins 1 & 2
                                                closed         closed

    33MHz          Open          Closed       pins 1 & 2      pins 2 & 3
                                                closed         closed

    40MHz         Closed          Open        pins 2 & 3      pins 1 & 2
                                                closed         closed

    50iMHz         Open           Open        pins 1 & 2      pins 1 & 2
                                                closed         closed

    50MHz         Closed         Closed       pins 2 & 3      pins 2 & 3
                                                closed         closed

    66iMHz         Open          Closed       pins 1 & 2      pins 2 & 3
                                                closed         closed

[Image]

                        USER CONFIGURABLE SETTINGS

                Function                    Jumper           Position

     Local bus enabled                       JP4           pins 2 & 3
                                                              closed

      Local bus disabled                      JP4           pins 1 & 2
                                                              closed

              CACHE CONFIGURATION

      Size          Bank 0          Bank 1

     256KB        (4) 32K x 8    (4) 32K x 8

      1MB         (4) 128K x 8   (4) 128K x 8

           CACHE JUMPER CONFIGURATION

   Size      JP11     JP12      JP14      JP15

  256KB      Open     Open      Open      Open

   1MB      Closed   Closed    Closed    Closed

                          CPU SPEED CONFIGURATION

      Speed              JP1                JP2                JP3

      33MHz           pins 1 & 2         pins 1 & 2         pins 2 & 3
                        closed            closed             closed

      40MHz           pins 2 & 3         pins 2 & 3         pins 1 & 2
                        closed            closed             closed

      50MHz           pins 1 & 2         pins 2 & 3         pins 1 & 2
                        closed            closed             closed

      60MHz           pins 2 & 3         pins 1 & 2         pins 1 & 2
                        closed            closed             closed

      66MHz           pins 2 & 3         pins 1 & 2         pins 1 & 2
                        closed            closed             closed

      80iMHz          pins 1 & 2         pins 1 & 2         pins 1 & 2
                        closed            closed             closed

[Image]

  DRAM CONFIGURATION (E480I CPU BOARD ONLY)

     Size          Bank 0          Bank 1

     16MB        (2) 1M x 36    (2) 1M x 36

     16MB        (2) 2M x 36        NONE

     24MB        (2) 1M x 36    (2) 2M x 36

     32MB        (2) 2M x 36    (2) 2M x 36

     32MB        (2) 4M x 36        NONE

     40MB        (2) 1M x 36    (2) 4M x 36

     48MB        (2) 2M x 36    (2) 4M x 36

     64MB        (2) 4M x 36    (2) 4M x 36

     64MB        (2) 8M x 36        NONE

     72MB        (2) 1M x 36    (2) 8M x 36

     80MB        (2) 2M x 36    (2) 8M x 36

     96MB        (2) 4M x 36    (2) 8M x 36

     128MB       (2) 8M x 36    (2) 8M x 36

              CACHE CONFIGURATION

      Size          Bank 0          Bank 1

     256KB        (4) 32K x 8    (4) 32K x 8

      1MB         (4) 128K x 8   (4) 128K x 8

           CACHE JUMPER CONFIGURATION

   Size      JP5       JP6       JP7       JP8

  256KB      Open     Open      Open      Open

   1MB      Closed   Closed    Closed    Closed

                          CPU SPEED CONFIGURATION

      Speed              JP1               JP2                 JP3

      50MHz           pins 1 & 2        pins 1 & 2      pins 1 & 2 closed
                       closed             closed

      66MHz           pins 1 & 2        pins 2 & 3      pins 1 & 2 closed
                       closed             closed

