
IPC CORPORATION, LTD.

IPC MBMPS328#10

Processor              80386SX (exact location unidentified)
Processor Speed        25/33MHz
Chip Set               Unidentified
Max. Onboard DRAM      9MB
Cache                  8/32KB
BIOS                   Unidentified
Dimensions             3550mm x 305mm
I/O Options            Scanner port, IFM328PNL connectors (2), serial ports
                       (2), floppy drive interface, IDE interfaces (2),
                       SCSI connector, parallel port, customer display
                       connector, printer power supply connector, drawer
                       connector, hard drive power connector, riser slot
NPU Options            None

[Image]

                                CONNECTIONS

  Purpose                 Location      Purpose                Location

  Scanner port               J1         SCSI connector            J11

  IFM328PNL connector        J2         2.5" IDE interface        J12

  Serial port 1              J3         3.5 " IDE interface       J13

  IFM328PNL connector        J5         Printer power             JP2
                                        supply connector

  Serial port                J6         Reset switch              JP1
  2/external floppy

  Customer display           J7         Drawer connector         JP18
  connector

  Speaker                    J9         Hard drive power         JP23
                                        connector

  Parallel port              J10        Riser slot                SL1

                        USER CONFIGURABLE SETTINGS

                Function                     Jumper          Position

     Read ROM scan code enabled              J4-1             Open

      Read program scan mode enabled          J4-1            Closed

     MCR mode select independent             J4-2             Open

      MCR mode select simultaneous            J4-2            Closed

     Reset disabled                           JP1             Open

      Reset enabled                            JP1            Closed

     Keyboard buzzer enabled                  JP3            Closed

      Keyboard buzzer disabled                 JP3             Open

     Operator display address select          JP4           pins 1 & 2
      100H                                                    closed

      Operator display address select          JP4           pins 2 & 3
      10CH                                                    closed

     Floppy drive set as A drive              JP7            Closed

      Floppy drive set as B drive              JP7             Open

     COM1 signal select RI signal             JP8           pins 1 & 2
                                                              closed

      COM1 signal select +5v                   JP8           pins 2 & 3
                                                              closed

     ROM type select external                 JP9            Closed

      ROM type select internal                 JP9             Open

     Keylock #5 to control read NVR          JP10           pins 1 & 2
      disabled                                                closed

      Keylock #5 to control read NVR          JP10           pins 2 & 3
      enabled                                                 closed

     SRAM for keyboard controller size       JP11           pins 1 & 2
      select 2KB                                              closed

      SRAM for keyboard controller size       JP11           pins 2 & 3
      select 8KB                                              closed

     NVR type select 128KB                   JP12             Open

      NVR type select 256KB                   JP12           pins 1 & 2
                                                              closed

      NVR type select 8/32KB                  JP12           pins 2 & 3
                                                              closed

     Keylock #1 to control write NVR         JP13           pins 1 & 2
      disabled                                                closed

      Keylock #1 to control write NVR         JP13           pins 2 & 3
      enabled                                                 closed

     CMOS memory clear 1287A only            JP15           pins 1 & 2
                                                              closed

      CMOS memory clear 1287 only             JP15           pins 2 & 3
                                                              closed

     Monitor type select monochrome          JP16             Open

      Monitor type select CGA/EGA/VGA         JP16            Closed

     IDE interface disabled                  JP17             Open

      IDE interface enabled                   JP17            Closed

     Serial port select COM1 & COM2          JP19           pins 1 & 2
                                                              closed

      Serial port select COM3 & COM4          JP19           pins 2 & 3
                                                              closed

                    USER CONFIGURABLE SETTINGS (CONT)

                Function                    Jumper           Position

     Keylock #1 control of floppy           JP21           pins 1 & 2
      access disabled                                         closed

      Keylock #1 control of floppy           JP21           pins 2 & 3
      access enabled                                          closed

     Hard drive type select 3.5"            JP22           pins 1 & 2
                                                              closed

      Hard drive type select 2.5"            JP22           pins 2 & 3
                                                              closed

  Note: The location of J4 is unidentified.

                            DRAM CONFIGURATION

       Size             Bank 0             Bank 1             Bank 2

      512KB              512KB              NONE               NONE

       1MB               512KB          (2) 256K x 9           NONE

      1.5MB              512KB          (2) 256K x 9       (2) 256K x 9

       3MB               512KB          (2) 256K x 9        (2) 1M x 9

       9MB               512KB          (2) 256K x 9        (2) 4M x 9

            Note: Bank 0 is factory installed and is not configurable.
            The location of Bank 0 is unidentified.

                            CACHE CONFIGURATION

            Note: The location and the cache chip sizes are unidentified.
            Cache installed will either be 8KB or 32KB.

                  CACHE JUMPER CONFIGURATION

        Size                 JP5                  JP6

         8KB           pins 2 & 3 closed   pins 1 & 2 closed

        32KB           pins 1 & 2 closed   pins 2 & 3 closed

         CPU SPEED CONFIGURATION

        Speed                JP14

        25MHz         pins 1 & 2 closed

        33MHz         pins 2 & 3 closed

                    MAGNETIC CARD READER CONFIGURATION

            MCR                      J4-3                    J4-4

         Single track              Closed                  Closed

           Dual track                Open                   Closed

          Triple track              Closed                   Open

  Note: The location of J4 is unidentified.

                    CCD SCANNER BAUD RATE CONFIGURATION

      Baud rate            J4-5              J4-6              J4-7

        1200 BPS          Closed            Closed            Closed

       2400 BPS           Open             Closed            Closed

        4800 BPS          Closed             Open             Closed

        9600 BPS          Closed            Closed             Open

  Note: The location of J4 is unidentified.

