
ELITEGROUP COMPUTER SYSTEMS, INC.

TS54P AIO (V1.0)

Processor             Pentium
Processor Speed       75/90/100/120/133/150MHz
Chip Set              Intel
Maximum Onboard       128MB
Memory
Cache                 256/512KB
BIOS                  Phoenix
Dimensions            330mm x 218mm
I/O Options           32-bit PCI slots (4), floppy drive interface, green
                      PC connector, IDE interfaces (2), parallel port,
                      serial ports (2), VRM connector, IR connector
NPU Options           None

[Image]

                                CONNECTIONS

        Function           Label            Function             Label

  Floppy drive               J4        Green PC connector      J11 pins 4
  interface                                                       & 5

  IDE interface 2            J5        Reset switch            J11 pins 9
                                                                 & 10

  Serial port 1              J6        Power LED & keylock    J11 pins 11
                                                                 - 15

  Serial port 2              J7        Speaker                J11 pins 17
                                                                 - 20

  Parallel port              J8        IR connector               J12

  IDE interface 1            J9        IDE interface LED          JP2

  VRM connector             J10        External battery          jp16

  Turbo LED              J11 pins 2    32-bit PCI slots        PC1 - PC4
                            & 3

                        USER CONFIGURABLE SETTINGS

                 Setting                     Label          Position

      Normal COM2/4                           J12       Pins 5 & 6, 7 & 8
                                                             closed

      IR function connector                   J12             Open

      37C665GT enabled                        JP7       Pins 1 & 2 closed

      37C665GT disabled                       JP7       Pins 2 & 3 closed

     ECP/EPP mode enabled                   JP10            Closed

      ECP/EPP mode disabled                  JP10             Open

     Factory configured - do not alter      JP12       Pins 2 & 3 closed

     CMOS memory normal operation           JP15             Open

      CMOS memory clear                      JP15            Closed

      Cache type select write back           JP25       Pins 1 & 2 closed

      Cache type select write through        JP25       Pins 2 & 3 closed

      PCI clock select PCICLK/4              JP26       Pins 1 & 2 closed

      PCI clock select PCICLK/3              JP26       Pins 2 & 3 closed

                       DRAM

      Size            Bank 0           Bank 1

       8MB         (2) 1M x 36          None

       8MB        (2) 512K x 36    (2) 512K x 36

      12MB         (2) 1M x 36     (2) 512K x 36

      12MB        (2) 512K x 36     (2) 1M x 36

      16MB         (2) 2M x 36          None

      16MB         (2) 1M x 36      (2) 1M x 36

      20MB         (2) 2M x 36     (2) 512K x 36

      20MB        (2) 512K x 36     (2) 2M x 36

      24MB         (2) 2M x 36      (2) 1M x 36

      24MB         (2) 1M x 36      (2) 2M x 36

      32MB         (2) 4M x 36          None

      32MB         (2) 2M x 36      (2) 2M x 36

      36MB         (2) 4M x 36     (2) 512K x 36

      36MB        (2) 512K x 36     (2) 4M x 36

      40MB         (2) 4M x 36      (2) 1M x 36

      40MB         (2) 1M x 36      (2) 4M x 36

      48MB         (2) 4M x 36      (2) 2M x 36

      48MB         (2) 2M x 36      (2) 4M x 36

      64MB         (2) 8M x 36          None

      64MB         (2) 4M x 36      (2) 4M x 36

      68MB         (2) 8M x 36     (2) 512K x 36

      68MB        (2) 512K x 36     (2) 8M x 36

      72MB         (2) 8M x 36      (2) 1M x 36

      72MB         (2) 1M x 36      (2) 8M x 36

      80MB         (2) 8M x 36      (2) 2M x 36

                 DRAM (CONT)

      Size          Bank 0          Bank 1

      80MB        (2) 2M x 36    (2) 8M x 36

      96MB        (2) 8M x 36    (2) 4M x 36

      96MB        (2) 4M x 36    (2) 8M x 36

     128MB        (2) 16M x 36       None

     128MB        (2) 8M x 36    (2) 8M x 36

  Note: Banks 0/1 are interchangeable.

                                CACHE SIZE

          Size               Bank 0         U17 & U18           TAG

   256KB (A) (pipeline        None        (2) 32K x 32       (1) 8K x 8
         burst)

   256KB (B) (pipeline        None        (2) 32K x 32      (1) 32K x 8
         burst)

   256KB (C) (burst)          None        (2) 32K x 32       (1) 8K x 8

   256KB (D) (burst)          None        (2) 32K x 32      (1) 32K x 8

       256KB (E)          (8) 32K x 8         None           (1) 8K x 8

       256KB (F)          (8) 32K x 8         None          (1) 32K x 8

         512KB            (8) 64K x 8         None          (1) 32K x 8

                               CACHE JUMPER

        Size           JP20       JP21       JP22       JP23       JP24

      256KB (A)       2 & 3      1 & 2      1 & 2      2 & 3      1 & 2
  (pipeline burst)

      256KB (B)       1 & 2      1 & 2      1 & 2      2 & 3      1 & 2
  (pipeline burst)

  256KB (C) (burst)   2 & 3      2 & 3      1 & 2      2 & 3      1 & 2

  256KB (D) (burst)   1 & 2      2 & 3      1 & 2      2 & 3      1 & 2

     256KB (E)        2 & 3      1 & 2      2 & 3      2 & 3      1 & 2

     256KB (F)        1 & 2      1 & 2      2 & 3      2 & 3      1 & 2

       512KB          2 & 3      1 & 2      2 & 3      1 & 2      2 & 3

  Note: Pins designated should be in the closed position.

              CACHE VOLTAGE

       Setting               JP1

        Mixed         Pins 2 & 3 closed

        3.3v          Pins 1 & 2 closed

                                 CPU SPEED

            Setting                        J10                  JP11

      75/90/100/120/133MHz        Pins 4 & 5, 6 & 7, 19         Open
                                  & 20, 21 & 22 closed

             150MHz                      Closed                Closed

                                 CPU SPEED

         Setting                    JP4                     JP5

          75MHz                    Open                     Open

          90MHz              Pins 3 & 4 closed              Open

         100MHz              Pins 1 & 2, 3 & 4              Open
                                  closed

         120MHz              Pins 3 & 4 closed             Closed

         133MHz              Pins 1 & 2, 3 & 4             Closed
                                  closed

                     CPU VOLTAGE (75MHZ - 133MHZ ONLY)

         Setting                   JP6                      JP27

     3.3v from power               Open                     Open
         supply

      3.3v from VRM          Pins 1 & 2, 3 & 4        Pins 1 & 2, 3 & 4
                                  closed                   closed

    CPU VOLTAGE (75MHZ - 133MHZ ONLY)

       Setting               JP28

    3.14v - 3.46v     Pins 1 & 2 closed

    3.3v - 3.46v      Pins 3 & 4 closed

    3.45v - 3.6v      Pins 5 & 6 closed

                         DMA CHANNEL

       Setting               JP8                  JP9

        DMA1           Pins 1 & 2 closed   Pins 1 & 2 closed

        DMA3           Pins 2 & 3 closed   Pins 2 & 3 closed

