
KLH

MODEL 215

Processor                 80386SX
Processor Speed           16/20MHz
Chip Set                  C & T
Maximum Onboard Memory    8MB
Cache                     None
BIOS                      Phoenix
Dimensions                330mm x 218mm
I/O Options               Floppy drive interface, IDE interface, parallel
                          port, PS/2 mouse port, serial port, VGA port,
                          riser slot
NPU Options               80387SX

[Image]

                               CONNECTIONS

         Function           Label            Function            Label

  VGA port                   CN1      Floppy drive interface      CN5

  Parallel port              CN2      IDE interface               CN6

  Serial port                CN3      Riser slot                  SL1

  PS/2 mouse port            CN4

  Note: CN6 is located on the riser card.

                        USER CONFIGURABLE SETTINGS

                 Setting                     Label           Position

      Oscillator select alternate              J3           Pins 1 & 2
      oscillator                                              closed

      Oscillator select standard               J3           Pins 2 & 3
      oscillator                                              closed

      Hard drive circuitry disabled           JP1           Pins 1 & 2
                                                              closed

      Hard drive circuitry enabled            JP1           Pins 2 & 3
                                                              closed

     Mouse enabled                          SW1/3              On

      Mouse disabled                         SW1/3             Off

     Serial port enabled                    SW1/5              On

      Serial port disabled                   SW1/5             Off

     Parallel port enabled                  SW1/6              On

      Parallel port disabled                 SW1/6             Off

     Floppy drive interface enabled         SW1/7              On

      Floppy drive interface disabled        SW1/7             Off

  Note: JP1 is located on the riser card.

                          DRAM

       Size             Bank 0             Bank 1

       1MB           (4) 256K x 9           None

       2MB           (4) 256K x 9       (4) 256K x 9

       4MB            (4) 1M x 9            None

       5MB           (4) 256K x 9        (4) 1M x 9

       8MB            (4) 1M x 9         (4) 1M x 9

  Note: The orientation of the banks is unidentified.

                                  MONITOR

            Setting                    SW1/1                 SW1/8

            Monochrome                  On                   Off

               Color                    Off                   On

                              ON BOARD VIDEO

           Setting                    SW1/2                  SW1/4

             Enabled                   On                    On

             Disabled                  Off                    Off

                                    IRQ

               Setting                                 JP4

                   IRQ3                         Pins 3 & 4 closed

                   IRQ4                         Pins 5 & 6 closed

                   IRQ5                         Pins 7 & 8 closed

                  IRQ9                         Pins 1 & 2 closed

                       MISCELLANEOUS TECHNICAL NOTE

  The location of pin 1 on all jumpers and pin 1 on SW1 is unidentified.

