
TORONTO MICROELECTRONICS, INC.

TME2106

Processor            Pentium
Processor Speed      75/90/100/120/133/150/166MHz
Chip Set             Intel
Video Chip Set       None
Maximum Onboard      128MB (EDO supported)
Memory
Maximum Video Memory None
Cache                256/512KB
BIOS                 AMI
Data Bus             Integrated 32-bit PCI/ 16-bit ISA
Dimensions           Unidentified
I/O Options          Ethernet port, floppy drive interface, IDE interfaces
                     (2), SCSI connector, parallel port, PS/2 mouse
                     interface, serial ports (2), cache slot, temperature
                     indicator connector, auxiliary connector, PC/104
                     connectors (2)
NPU Options          None

[Image]

                                CONNECTIONS

  Purpose                 Location     Purpose                 Location

  SCSI interface LED         D1        PC/104 C & D               J9
                                       connector

  Network/LAN LED           DC1A       Ethernet port             J10

  Network/LAN LED           DC1B       Parallel port             J11

  Chassis fan power          J1        Temperature               JP2
                                       indicator connector

  PS/2 mouse                 J2        Auxiliary connector       JP3
  interface

  Keyboard connector         J3        IDE (44-pin)              JP4
                                       interface 1

  SCSI wide 2                J4        Floppy drive              JP5
  interface                            interface

  External battery           J5        IDE (44-pin)              JP6
                                       interface 2

  Serial port 1              J6        Reset switch               S1

  Serial port 2              J7        Cache slot                SL1

  PC/104 A & B               J8
  connector

  Note: The location of D1 is unidentified. The orientation of DC1A &
  DC1B is unidentified.

                        USER CONFIGURABLE SETTINGS

                Function                    Label          Position

     CMOS memory normal operation           JP1             Open

      CMOS memory clear                      JP1            Closed

     Factory configured - do not           SW1/1        Unidentified
      alter

     Factory configured - do not           SW1/2        Unidentified
      alter

     Factory configured - do not           SW1/3        Unidentified
      alter

      Watchdog timer enabled                SW2/1             On

      Watchdog timer disabled               SW2/1             Off

      C800-CFFFF enabled                    SW2/4             On

      C800-CFFFF disabled                   SW2/4             Off

      D0000-D7FFF enabled                   SW2/5             On

      D0000-D7FFF disabled                  SW2/5             Off

      D8000-DFFFF enabled                   SW2/6             On

      D8000-DFFFF disabled                  SW2/6             Off

      PS/2 mouse enabled                    SW2/7             On

      PS/2 mouse disabled                   SW2/7             Off

      Monitor type select CGA               SW2/8             On

      Monitor type select                   SW2/8             Off
      monochrome/VGA

      AUXCLK to backplane enabled           SW3/1             On

      AUXCLK to backplane disabled          SW3/1             Off

      AUXDATA to backplane enabled          SW3/2             On

      AUXDATA to backplane disabled         SW3/2             Off

      SWRST to backplane enabled            SW3/3             On

      SWRST to backplane disabled           SW3/3             Off

      VABT1 to backplane enabled            SW3/4             On

      VBAT1 to backplane disabled           SW3/4             Off

      KBCLK to backplane enabled            SW3/5             On

      KBCLK to backplane disabled           SW3/5             Off

      KBDATA to backplane enabled           SW3/6             On

      KBDATA to backplane disabled          SW3/6             Off

      SPKR OUTPUT to backplane enabled      SW3/7             On

      SPKR OUTPUT to backplane              SW3/7             Off
      disabled

      KBINH to backplane enabled            SW3/8             On

      KBINH to backplane disabled           SW3/8             Off

      Jumper information unavailable         T1          Unidentified

  Note: SW2/5 must be off for INT47 to be used.

              DRAM CONFIGURATION

      Size          Bank 0          Bank 1

      8MB         (2) 1M x 36        None

      16MB        (2) 2M x 36        None

      16MB        (2) 1M x 36    (2) 1M x 36

      24MB        (2) 1M x 36    (2) 2M x 36

      32MB        (2) 4M x 36        None

      32MB        (2) 2M x 36    (2) 2M x 36

      40MB        (2) 1M x 36    (2) 4M x 36

      48MB        (2) 2M x 36    (2) 4M x 36

      64MB        (2) 8M x 36        None

      64MB        (2) 4M x 36    (2) 4M x 36

      72MB        (2) 1M x 36    (2) 8M x 36

      80MB        (2) 2M x 36    (2) 8M x 36

      96MB        (2) 4M x 36    (2) 8M x 36

     128MB        (2) 8M x 36    (2) 8M x 36

     128MB        (2) 16M x 36       None

                CACHE CONFIGURATION

           Size                      SL2

          256KB            256KB module installed

          512KB            512KB module installed

                            CPU SPEED SELECTION

    CPU       Clock     Multiplier     JP7     SW2/2     SW2/3     SW1/4
   speed      speed

   75MHz      50MHz        1.5x       1 & 2     On        On        Off

   90MHz      60MHz        1.5x       2 & 3     On        Off       Off

  100MHz      66MHz        1.5x       2 & 3     Off       On        Off

  120MHz      60MHz         2x        2 & 3     On        Off       On

  133MHz      66MHz         2x        2 & 3     Off       On        On

  150MHz      60MHz        2.5x       2 & 3     On        Off       On

  166MHz      66MHz        2.5x       2 & 3     Off       On        On

  Note: Pins designated should be in the closed position. If 150MHz or
  166MHz CPU is used, install R40 (0 Ohm) & R39 (10K).

                             DIAGNOSTIC LED(S)

      LED          Color        Status                Condition

    DC1A/B         Green          On              UTP link is good

    DC1A/B         Green          Off        LAN controller in AUI mode

    DC1A/B          Red           On           LAN controller detects a
                                                collision in TPI mode

    DC1A/B          Red           Off        No collision detected by LAN
                                                     controller

