
PURETEK INDUSTRIAL CO., LTD.

PT-5001

Processor           CX M1/Pentium
Processor Speed     75/90/100/120/133/150/166/180/200MHz
Chip Set            Intel
Video Chip Set      None
Maximum Onboard     128MB (EDO supported)
Memory
Maximum Video       None
Memory
Cache               256/512KB
BIOS                Award
Dimensions          250mm x 220mm
I/O Options         32-bit PCI slots (4), floppy drive interface, green PC
                    connector, IDE interfaces (2), parallel port, PS/2
                    mouse interface, serial ports (2), cache slot, IR
                    connector
NPU Options         None

[Image]

                                CONNECTIONS

  Purpose                  Location    Purpose                  Location

  Serial port 1              CN1       Reset switch               JP19

  Serial port 2              CN2       Turbo switch               JP20

  Parallel port              CN3       Turbo LED                  JP21

  Floppy drive interface     CN4       IDE interface LED          JP22

  IDE interface 2            CN5       Power LED & keylock        JP29

  IDE interface 1            CN6       Speaker                    JP30

  PS/2 mouse interface       JP7       IR connector               JP31

  External battery           JP8       32-bit PCI slots         PC1 - PC4

  Green PC connector         JP18      Cache slot                 SL1

                        USER CONFIGURABLE SETTINGS

               Function                    Label           Position

     Factory configured - do not           JP4          Unidentified
      alter

     Factory configured - do not           JP6          Unidentified
      alter

     CMOS memory normal operation          JP8        Pins 2 & 3 closed

      CMOS memory clear                     JP8        Pins 3 & 4 closed

      Battery type select external          JP8             Closed

     Factory configured - do not           JP9          Unidentified
      alter

     Factory configured - do not          JP11          Unidentified
      alter

      Dallas 1287A clock normal            JP17              Open
      operation

      Dallas 1287A clock clear             JP17             Closed

      IDE interface 2 IRQ15 enabled        JP25        Pins 1 & 2 closed

      IDE interface 2 IRQ15 disabled       JP25        Pins 2 & 3 closed

      IDE interface 1 IRQ14 enabled        JP26        Pins 1 & 2 closed

      IDE interface 1 IRQ14 disabled       JP26        Pins 2 & 3 closed

      Flash BIOS write protect             JP27        Pins 1 & 2 closed
      enabled

      Flash BIOS write protect             JP27        Pins 2 & 3 closed
      disabled

      Flash BIOS voltage select 12v        JP28        Pins 1 & 2 closed

      Flash BIOS voltage select 5v         JP28        Pins 2 & 3 closed

             DRAM CONFIGURATION

     Size          Bank 0        Bank 1

      8MB        (2) 1M x 36      None

     16MB        (2) 1M x 36   (2) 1M x 36

     16MB        (2) 2M x 36      None

     24MB        (2) 1M x 36   (2) 2M x 36

     24MB        (2) 2M x 36   (2) 1M x 36

     32MB        (2) 2M x 36   (2) 2M x 36

     32MB        (2) 4M x 36      None

     40MB        (2) 1M x 36   (2) 4M x 36

     40MB        (2) 4M x 36   (2) 1M x 36

     48MB        (2) 2M x 36   (2) 4M x 36

                    DRAM CONFIGURATION (CONT)

         Size                 Bank 0                Bank 1

         48MB              (2) 4M x 36            (2) 2M x 36

         64MB              (2) 4M x 36            (2) 4M x 36

         64MB              (2) 8M x 36               None

         72MB              (2) 1M x 36            (2) 8M x 36

         72MB              (2) 8M x 36            (2) 1M x 36

         80MB              (2) 2M x 36            (2) 8M x 36

         80MB              (2) 8M x 36            (2) 2M x 36

         96MB              (2) 4M x 36            (2) 8M x 36

         96MB              (2) 8M x 36            (2) 4M x 36

        128MB              (2) 8M x 36            (2) 8M x 36

  Note: Board accepts EDO memory. Board also accepts x 32 SIMMs.

                            CACHE CONFIGURATION

      Size          Bank 0              TAG                   SL1

     256KB       (2) 32K x 32       Unidentified         Not installed

   512KB (A)     (2) 32K x 32       Unidentified          256KB module
                                                           installed

   512KB (B)     (2) 64K x 32       Unidentified         Not installed

            Note: If cache module has onboard TAG, remove TAG from TAG
            socket. If cache module does not have onboard TAG, install
            TAG at TAG socket. The size of the TAG is unidentified.

                        CACHE JUMPER CONFIGURATION

       Size              JP1                JP2                JP5

      256KB           Pins 1 & 2         Pins 1 & 2         Pins 1 & 2
                        closed            closed             closed

   512KB (A/B)        Pins 2 & 3         Pins 2 & 3         Pins 2 & 3
                        closed            closed             closed

                        CPU SPEED SELECTION (CYRIX)

   CPU speed         JP12           JP13           JP14          JP24

     120MHz       1 & 2, 3 &       Closed          Open          1 & 2
                      4

     150MHz         1 & 2          Closed          Open          2 & 3

  Note: Pins designated should be in the closed position.

                        CPU SPEED SELECTION (INTEL)

    CPU       Clock    Multiplier     JP12     JP13       JP14      JP24
   speed     speed

   75MHz     50MHz        1.5x         1 &     Open       Open     1 & 2
                                      2, 3
                                      & 4

   90MHz     60MHz        1.5x        1 & 2    Open       Open     2 & 3

  100MHz     66MHz        1.5x        3 & 4    Open       Open     2 & 3

  120MHz     60MHz         2x         1 & 2   Closed      Open     2 & 3

  133MHz     66MHz         2x         3 & 4   Closed      Open     2 & 3

  150MHz     60MHz        2.5x        1 & 2   Closed     Closed    2 & 3

  166MHz     66MHz        2.5x        3 & 4   Closed     Closed    2 & 3

  180MHz     60MHz         3x         1 & 2    Open      Closed    2 & 3

  200MHz     66MHz         3x         3 & 4    Open      Closed    2 & 3

  Note: Pins designated should be in the closed position.

                           CPU VOLTAGE SELECTION

     Voltage          JP3       JP10       JP15       JP16        JP23

       3.3v          1 & 3,    1 & 2, 3    1 & 2     1 & 2        Open
                     2 & 4     & 4, 5 &
                                  6

      3.45v          1 & 3,    1 & 2, 3    2 & 3     2 & 3        Open
                     2 & 4     & 4, 5 &
                                  6

  Dual 2.5v/3.3v     Open       Open       Open      1 & 2       Closed

  Dual 2.5v/3.45v    Open       Open       Open      2 & 3       Closed

  Note: Pins designated should be in the closed position.

