
AMERICAN MEGATRENDS, INC.

GOLIATH QUAD

Processor          Pentium Pro
Processor Speed    133/150/180/200/233/240/283/300/325MHz
Chip Set           Intel
Video Chip Set     None
Maximum Onboard    1GB (EDO supported)
Memory
Maximum Video      None
Memory
Cache              256/512KB (located on Pentium Pro CPU)
BIOS               AMI
Dimensions         333mm x 305mm
I/O Options        External memory card slot, 32-bit PCI slots (6), floppy
                   drive interface, IDE interface, parallel port, PS/2
                   mouse interface, serial ports (2), VRM connectors (4),
                   CPU slots (2)
NPU Options        None

[Image]

                                CONNECTIONS

  Purpose                  Location    Purpose                  Location

  IDE interface               J2       Reset switch               J27

  Floppy drive interface      J3       Speaker                    J28

  Serial port 1               J5       IDE interface LED          J29

  Serial port 2               J6       CPU slot                   SL1

  Parallel port               J7       CPU slot                   SL2

  PS/2 mouse interface       J10       External memory card       SL3

  Power LED & keylock        J22       32-bit PCI slots         PC1 - PC6

  Note: The location of J22 is unidentified.

                        USER CONFIGURABLE SETTINGS

               Function                    Label           Position

     Factory configured - do not           J4               Open
      alter

     Factory configured - do not           J17        Pins 2 & 3 closed
      alter

     Factory configured - do not           J20              Open
      alter

      IDE DREQ enabled                      J21             Closed

      IDE DREQ disabled                     J21              Open

     Parallel port IRQ select IRQ7         J23        Pins 1 & 2 closed

      Parallel port IRQ select IRQ5         J23        Pins 2 & 3 closed

     PS/2 mouse IRQ12 enabled              J24        Pins 1 & 2 closed

      PS/2 mouse IRQ12 disabled             J24        Pins 2 & 3 closed

     Factory configured - do not           J26          Unidentified
      alter

[Image]

                            DIMM CONFIGURATION

      Size          Bank 0        Bank 1         Bank 2         Bank 3

      16MB        (1) 2M x 72      None           None           None

      32MB        (1) 2M x 72   (1) 2M x 72       None           None

      64MB        (1) 2M x 72   (1) 2M x 72    (1) 2M x 72   (1) 2M x 72

      32MB        (1) 2M x 72      None           None           None

      64MB        (1) 2M x 72   (1) 2M x 72       None           None

     128MB        (1) 2M x 72   (1) 2M x 72    (1) 2M x 72   (1) 2M x 72

      8MB         (1) 1M x 72      None           None           None

      32MB        (1) 1M x 72   (1) 1M x 72    (1) 1M x 72   (1) 1M x 72

      64MB        (1) 1M x 72   (1) 1M x 72    (1) 1M x 72   (1) 1M x 72

      32MB        (1) 4M x 72      None           None           None

     128MB        (1) 4M x 72   (1) 4M x 72    (1) 4M x 72   (1) 4M x 72

     256MB        (1) 4M x 72   (1) 4M x 72    (1) 4M x 72   (1) 4M x 72

     128MB         (1) 16M x       None           None           None
                      72

     512MB         (1) 16M x     (1) 16M x      (1) 16M x    (1) 16M x 72
                      72            72             72

      1GB          (1) 16M x     (1) 16M x      (1) 16M x    (1) 16M x 72
                      72            72             72

  Note: Board accepts EDO memory. Board also accepts 8M x 72 DIMMs.

                        DIMM CONFIGURATION (CON'T)

      Size          Bank 4        Bank 5         Bank 6         Bank 7

      16MB           None          None           None           None

      32MB           None          None           None           None

      64MB           None          None           None           None

      32MB        (1) 2M x 72      None           None           None

      64MB        (1) 2M x 72   (1) 2M x 72       None           None

     128MB        (1) 2M x 72   (1) 2M x 72    (1) 2M x 72   (1) 2M x 72

      8MB            None          None           None           None

      32MB           None          None           None           None

      64MB        (1) 1M x 72   (1) 1M x 72    (1) 1M x 72   (1) 1M x 72

      32MB           None          None           None           None

     128MB           None          None           None           None

     256MB        (1) 4M x 72   (1) 4M x 72    (1) 4M x 72   (1) 4M x 72

     128MB           None          None           None           None

     512MB           None          None           None           None

      1GB          (1) 16M x     (1) 16M x      (1) 16M x    (1) 16M x 72
                      72            72             72

  Note: Board accepts EDO memory.

                        DIMM VOLTAGE CONFIGURATION

       Voltage                       J11                       J12

         3.3v           1 & 2, 3 & 4, 5 & 6, 7 & 8, 9          Open
                         & 10, 11 & 12, 13 & 14, 15 &
                            16, 17 & 18, 19 & 20

                      CACHE CONFIGURATION

  Note: 256KB/512KB cache is located on the Pentium Pro CPU.

                            CPU SPEED SELECTION

     CPU speed         Clock speed          J15                J190

       133MHz             66MHz         1 & 2, 3 & 4,     1 & 2, 3 & 4, 5
                                        5 & 6, 7 & 8        & 6, 7 & 8

       150MHz             60MHz         1 & 2, 3 & 4,     1 & 2, 3 & 4, 7
                                           7 & 8               & 8

       180MHz             60MHz         1 & 2, 3 & 4,     1 & 2, 3 & 4, 5
                                           5 & 6               & 6

       200MHz             66MHz         1 & 2, 3 & 4,     1 & 2, 3 & 4, 5
                                           5 & 6               & 6

       233MHz             66MHz         1 & 2, 3 & 4       1 & 2, 3 & 4

       240MHz             60MHz         3 & 4, 5 & 6,     3 & 4, 5 & 6, 7
                                           7 & 8               & 8

       283MHz             66MHz         3 & 4, 7 & 8       3 & 4, 7 & 8

       300MHz             60MHz         3 & 4, 5 & 6       3 & 4, 5 & 6

       325MHz             60MHz            3 & 4              3 & 4

  Note: Pins designated should be in the closed position. The location of
  J190 is unidentified. J15 sets CPU card 1 and J190 sets CPU card 2.

                            PCI SPEED SELECTION

    CPU speed          External          Internal              J16

     150MHz             60MHz              30MHz        Pins 1 & 2, 5 & 6
                                                             closed

     180MHz             60MHz              30MHz        Pins 1 & 2, 5 & 6
                                                             closed

     200MHz             66MHz              33MHz        Pins 3 & 4 closed

                           DMA CHANNEL SELECTION

         Channel                    J18                      J19

            None                   Open                    Open

               0             Pins 1 & 2 closed        Pins 1 & 2 closed

               1             Pins 3 & 4 closed        Pins 3 & 4 closed

               3             Pins 5 & 6 closed        Pins 5 & 6 closed

[Image]

                                CONNECTIONS

  Purpose                 Location    Purpose                    Location

  Overheat LED              LED1      Chassis fan power            JP2

  Overheat LED              LED2      VRM connectors               VRM

  Chassis fan power         JP1

                        USER CONFIGURABLE SETTINGS

                Function                     Label           Position

     Factory configured - do not alter       JP3             Closed

                           CPU VOLTAGE SELECTION

         Voltage                    J1                       J2

          3.3v             Pins 1 & 2, 5 & 6, 7    Pins 1 & 2, 5 & 6, 7 &
                                & 8 closed                8 closed

[Image]

                                CONNECTIONS

  Purpose                 Location    Purpose                    Location

  Overheat LED              LED1      Chassis fan power            JP2

  Overheat LED              LED2      VRM connectors               VRM

  Chassis fan power         JP1

                           CPU VOLTAGE SELECTION

         Voltage                    J1                       J2

          3.3v             Pins 1 & 2, 5 & 6, 7    Pins 1 & 2, 5 & 6, 7 &
                                & 8 closed                8 closed

                      MISCELLANEOUS TECHNICAL NOTES.

  Note: The LEDs on CPU Card 1 and CPU Card2 are 'overheat' indicators.
  If any of these LEDs come on on either card, turn computer off as soon
  as possible to prevent damage.

  Note: If installing CPU card 1 only, insert the terminator card in CPU
  socket 2. Do not use CPU card 2 only

