
FORCOM TECHNOLOGY CORPORATION

FT-386WL

Processor                 80386SX/CX486SLC
Processor Speed           25/33/40MHz
Chip Set                  ALI
Video Chip Set            Cirrus Logic
Maximum Onboard Memory    16MB
Maximum Video Memory      1MB
Cache                     None
BIOS                      AMI
Dimensions                223mm x 203mm
I/O Options               Floppy drive interface, IDE interface, parallel
                          port, PS/2 mouse port, serial ports (2), VGA
                          feature connector, VGA port, riser slot
NPU Options               80387SX

[Image]

                                CONNECTIONS

  Purpose                Location      Purpose                Location

  VGA port                  CN1        Turbo LED            JP28 pins 1 &
                                                                  2

  Parallel port             CN2        Turbo switch         JP28 pins 4 &
                                                                  5

  Serial port 2             CN3        IDE interface LED        JP29

  Serial port 1             CN4        Reset switch             JP30

  PS/2 mouse port           CN5        Speaker                  JP31

  Floppy drive              CN6        Power LED &              JP32
  interface                            keylock

  IDE interface             CN7        LED connector            JP33

  VGA feature               CN8        Riser slot                SL1
  connector

  External battery          JP6

                        USER CONFIGURABLE SETTINGS

               Function                    Label           Position

      Monitor type select color             JP5              Open

      Monitor type select monochrome        JP5             Closed

     CMOS memory normal operation          JP7              Open

      CMOS memory clear                     JP7             Closed

      PS/2 mouse disabled                   JP8              Open

      PS/2 mouse enabled                    JP8             Closed

      Floppy drive interface enabled        JP15       Pins 1 & 2 closed

      Floppy drive interface disabled       JP15       Pins 2 & 3 closed

      IDE interface enabled                 JP16       Pins 1 & 2 closed

      IDE interface disabled                JP16       Pins 2 & 3 closed

      RTC type select 146818                JP20             Open

      RTC type select Dallas                JP20            Closed

      Parity enabled                        JP22             Open

      Parity disabled                       JP22            Closed

      Pipeline mode enabled                 JP23       Pins 1 & 2 closed

      Pipeline mode disabled                JP23       Pins 2 & 3 closed

     Factory configured - do not           JP25         Unidentified
      alter

      IRQ9 enabled                          JP26            Closed

      IRQ9 disabled                         JP26             Open

      NPU synchronous with CPU              JP27       Pins 1 & 2 closed

      NPU asynchronous with CPU             JP27       Pins 2 & 3 closed

      On board video enabled                JP36       Pins 1 & 2 closed

      On board video disabled               JP36       Pins 2 & 3 closed

      Power good signal detect from         JP37       Pins 1 & 2 closed
      power supply

      Power good signal detect from         JP37       Pins 2 & 3 closed
      board

                  DRAM CONFIGURATION

       Size             Bank 0            Bank 1

      512KB          (2) 256K x 9          None

       1MB           (2) 256K x 9      (2) 256K x 9

       2MB            (2) 1M x 9           None

       4MB            (2) 1M x 9        (2) 1M x 9

       8MB            (2) 4M x 9           None

       16MB           (2) 4M x 9        (2) 4M x 9

  Note: The location of banks 0 & 1 is unidentified.

                        VIDEO MEMORY CONFIGURATION

  Note: Board accepts 256KB/512KB/1MB video memory. The size of the chips
  is unidentified.

                      CPU SPEED SELECTION

     Speed           JP21            JP24            JP39

     25MHz           1 & 2           2 & 3       1 & 2, 5 & 6

     33MHz           2 & 3           2 & 3       1 & 2, 3 & 4

     40MHz           1 & 2           1 & 2          5 & 6

  Note: Pins designated should be in the closed position.

               PARALLEL PORT ADDRESS SELECTION

       Setting               JP9                  JP10

        278h           Pins 2 & 3 closed   Pins 2 & 3 closed

        378h           Pins 1 & 2 closed   Pins 1 & 2 closed

        3BCh           Pins 1 & 2 closed   Pins 2 & 3 closed

      Disabled         Pins 2 & 3 closed   Pins 1 & 2 closed

               SERIAL PORT 1 ADDRESS SELECTION

       Setting               JP11                 JP12

        2E8h           Pins 1 & 2 closed   Pins 2 & 3 closed

        3E8h           Pins 2 & 3 closed   Pins 2 & 3 closed

        3F8h           Pins 1 & 2 closed   Pins 1 & 2 closed

      Disabled         Pins 2 & 3 closed   Pins 1 & 2 closed

               SERIAL PORT 2 ADDRESS SELECTION

       Setting               JP13                 JP14

        2E8h           Pins 1 & 2 closed   Pins 2 & 3 closed

        3E8h           Pins 1 & 2 closed   Pins 1 & 2 closed

        3F8h           Pins 2 & 3 closed   Pins 2 & 3 closed

      Disabled         Pins 2 & 3 closed   Pins 1 & 2 closed

    SERIAL PORT 1 INTERRUPT SELECTION

         IRQ                 JP38

        IRQ3          Pins 1 & 2 closed

        IRQ4          Pins 3 & 4 closed

        IRQ5          Pins 5 & 6 closed

      SERIAL PORT 2 INTERRUPT SELECTION

          IRQ                   JP38

         IRQ3            Pins 7 & 8 closed

         IRQ4            Pins 9 & 10 closed

         IRQ5           Pins 11 & 12 closed

      PARALLEL PORT INTERRUPT SELECTION

          IRQ                   JP38

         IRQ5           Pins 13 & 14 closed

         IRQ7           Pins 15 & 16 closed

