
DIGITAL EQUIPMENT CORPORATION

PRIORIS HX 6000

Processor                    Pentium Pro
Processor Speed              200MHz
Chip Set                     Unidentified
Video Chip Set               Unidentified
Maximum Onboard Memory       512MB (EDO supported)
Maximum Video Memory         Unidentified
Cache                        256/512KB (located on Pentium Pro CPU)
BIOS                         Unidentified
Dimensions                   355mm x 304mm
I/O Options (Backplane)      32-bit PCI slots (6), floppy drive interface,
                             SCSI interface, Ultra Wide SCSI interfaces
                             (2), VGA port, parallel port, PS/2 mouse port,
                             serial ports (2), CPU card slot , Ethernet
                             connector
I/O Options (CPU)            VRM connectors (2)
NPU Options                  None

[Image]

                                CONNECTIONS

  Purpose                   Location    Purpose                Location

  Chassis fan power            C1       Serial port               CN2

  Speaker                      C2       Parallel port             CN3

  Chassis fan power            C3       VGA port                  CN4

  Chassis fan power            C4       PS/2 mouse port           CN5

  Chassis fan power            C5       Ultra Wide SCSI           CN6
                                        interface

  OCP connector                C6       Floppy drive              CN7
                                        interface

  Power control                C7       Ultra Wide SCSI           CN8
                                        interface

  Chassis fan power            C8       Ultra Wide SCSI           CN9
                                        interface

  Ethernet connector           C9       32-bit PCI slots       PC1  PC6

  Remote Server               C10       CPU card slot             SL1
  Management connector

  Serial port                 CN1

                        USER CONFIGURABLE SETTINGS

                Function                     Label           Position

     EISA slot 4 master delay select         J56           Pins 1 & 2
      normal                                                  closed

      EISA slot 4 master delay select         J56           Pins 2 & 3
      delay 1 clock cycle                                     closed

     EISA slot 5 master delay select         J57           Pins 1 & 2
      normal                                                  closed

      EISA slot 5 master delay select         J57           Pins 2 & 3
      delay 1 clock cycle                                     closed

     BIOS upgrade disabled                  SW1/1             Off

      BIOS upgrade enabled                   SW1/1              On

     Flash BIOS normal operation            SW1/2             Off

      Flash BIOS recovery mode               SW1/2              On

     Boot block disabled                    SW1/3             Off

      Boot block enabled                     SW1/3              On

     Password normal operation              SW1/4             Off

      Password clear                         SW1/4              On

     RSM not installed                      SW1/5              On

      RSM installed                          SW1/5             Off

     NVRAM memory normal operation          SW1/6             Off

      NVRAM memory clear                     SW1/6              On

     Factory configured - do not alter      SW1/7             Off

     Factory configured - do not alter      SW1/8             Off

                     VIDEO MEMORY CONFIGURATION

  Note: The location and size of the video memory is unidentified.

[Image]

                                CONNECTIONS

  Purpose                   Location   Purpose                   Location

  VRM connector              VRM1      VRM connector              VRM2

                        USER CONFIGURABLE SETTINGS

                Function                     Label           Position

     Factory configured - do not alter       J16              Open

     Factory configured - do not alter       J17              Open

                            SIMM CONFIGURATION

     Size          Bank 0         Bank 1         Bank 2         Bank 3

     32MB        (2) 4M x 36       None           None           None

     64MB        (2) 4M x 36   (2) 4M x 36        None           None

     64MB        (2) 8M x 36       None           None           None

     96MB        (2) 4M x 36   (2) 4M x 36    (2) 4M x 36        None

     128MB       (2) 4M x 36   (2) 4M x 36    (2) 4M x 36    (2) 4M x 36

     128MB       (2) 8M x 36   (2) 8M x 36        None           None

     128MB       (2) 16M x 36      None           None           None

     192MB       (2) 8M x 36   (2) 8M x 36    (2) 8M x 36        None

     256MB       (2) 8M x 36   (2) 8M x 36    (2) 8M x 36    (2) 8M x 36

     512MB       (2) 16M x 36  (2) 16M x 36   (2) 16M x 36   (2) 16M x 36

            Note: Board accepts EDO memory.

                      CACHE CONFIGURATION

  Note: 256KB/512KB cache is located on the Pentium Pro CPU.

                            CPU SPEED SELECTION

    CPU       Clock    Multiplier     SW1/1    SW1/2     SW1/3     SW1/4
   speed     speed

  200MHz     66MHz         3x          On        On       Off       On

