
TEKNOR INDUSTRIAL COMPUTERS, INC.

TEK 932

Processor                  Pentium
Processor Speed            75/100MHz
Chip Set                   Intel
Video Chip Set             Unidentified
Maximum Onboard Memory     128MB
Maximum Video Memory       Unidentified
Cache                      256/512KB
BIOS                       AMI
Dimensions                 Unidentified
I/O Options                Floppy drive interface, IDE interface, PS/2
                           mouse interface, parallel port, serial ports
                           (2), VGA port, cache slot, flat panel connector
NPU Options                None

[Image]

                                CONNECTIONS

  Purpose                 Location     Purpose                 Location

  External battery           B1        Flat panel connector       J6

  IDE interface              J1        PS/2 mouse interface       J7

  Floppy drive               J2        VGA port                   J9
  interface

  Keyboard, speaker,         J3        Chassis fan power          J10
  reset, LED

  Serial port 1              J4        Parallel port              J11

  Serial port 2              J5        Cache slot                 SL1

                        USER CONFIGURABLE SETTINGS

                Function                     Label           Position

     BIOS boot select normal boot             J8              Open

      BIOS boot select emergency boot          J8             Closed

     Internal battery disabled                W9              Open

      Internal battery enabled                 W9             Closed

     Pixel clock polarity positive           W10           Pins 1 & 2
                                                              closed

      Pixel clock polarity negative           W10           Pins 2 & 3
                                                              closed

     PS/2 mouse IRQ12 disabled               W11              Open

      PS/2 mouse IRQ12 enabled                W11             Closed

     Power fail monitoring disabled          W13              Open

      Power fail monitoring enabled           W13             Closed

     IOCHRDY signal to IDE interface         W18              Open
      disabled

      IOCHRDY signal to IDE interface         W18             Closed
      enabled

                SIMM CONFIGURATION

      Size            Bank 0           Bank 1

       2MB        (2) 256K x 36         None

       4MB        (2) 512K x 36         None

       4MB        (2) 256K x 36    (2) 256K x 36

       6MB        (2) 512K x 36    (2) 256K x 36

       8MB         (2) 1M x 36          None

       8MB        (2) 512K x 36    (2) 512K x 36

      10MB         (2) 1M x 36     (2) 256K x 36

      12MB        (2) 512K x 36     (2) 1M x 36

      16MB         (2) 2M x 36          None

      16MB         (2) 1M x 36      (2) 1M x 36

      18MB         (2) 2M x 36     (2) 256K x 36

      20MB        (2) 512K x 36     (2) 2M x 36

      24MB         (2) 2M x 36      (2) 1M x 36

      32MB         (2) 4M x 36          None

      32MB         (2) 2M x 36      (2) 2M x 36

      34MB         (2) 4M x 36     (2) 256K x 36

      36MB        (2) 512K x 36     (2) 4M x 36

      40MB         (2) 4M x 36      (2) 1M x 36

      48MB         (2) 2M x 36      (2) 4M x 36

      64MB         (2) 8M x 36          None

      66MB        (2) 256K x 36     (2) 8M x 36

      68MB         (2) 8M x 36     (2) 512K x 36

      72MB         (2) 1M x 36      (2) 8M x 36

      80MB         (2) 8M x 36      (2) 2M x 36

      96MB         (2) 4M x 36      (2) 8M x 36

      128MB        (2) 8M x 36      (2) 8M x 36

                CACHE CONFIGURATION

           Size                      SL1

          256KB            256KB module installed

          512KB            512KB module installed

               VIDEO MEMORY CONFIGURATION

  Note: The size of the video memory is unidentified.

                           DMA CHANNEL SELECTION

         Channel                    W16                      W17

               1             Pins 1 & 2 closed        Pins 1 & 2 closed

               3             Pins 2 & 3 closed        Pins 2 & 3 closed

            None                   Open                    Open

                     PARALLEL PORT INTERRUPT SELECTION

                 IRQ                                   W15

                   IRQ5                         Pins 1 & 2 closed

                  IRQ7                         Pins 2 & 3 closed

                   None                               Open

                     SERIAL PORT 2 LOOPBACK SELECTION

           Setting                     W5                     W6

             Normal                  Open                   Open

             Loopback                Closed                 Closed

                          SERIAL PORT 2 SELECTION

     Setting           W3             W4            W7            W8

       RS-232      Pins 1 & 2    Pins 1 & 2    Pins 1 & 2     Pins 1 & 2
                     closed         closed        closed        closed

        RS-485      Pins 2 & 3    Pins 2 & 3    Pins 2 & 3     Pins 2 & 3
                     closed         closed        closed        closed

                       FLOPPY DRIVE EDOUT SELECTION

                 Setting                                W1

             Left to software                         Open

           Ground to pin 17 on J2                Pins 2 & 4 closed

           Ground to pin 29 on J2                Pins 3 & 4 closed

            EDOUT to pin 29 on J2                Pins 1 & 3 closed

            EDOUT to pin 17 on J2                Pins 1 & 2 closed

                       FLOPPY DRIVE HDOUT SELECTION

                 Setting                                W2

             Left to software                         Open

           Ground to pin 27 on J2                Pins 2 & 4 closed

           Ground to pin 33 on J2                Pins 3 & 4 closed

            HDOUT to pin 33 on J2                Pins 1 & 3 closed

            HDOUT to pin 27 on J2                Pins 1 & 2 closed

                            BASE I/O SELECTION

               Address                                 W14

                  190H                     Pins 1 & 2, 3 & 4 closed

                   290H                         Pins 1 & 2 closed

                   390H                         Pins 3 & 4 closed

                   390H                               Open

                       EXTENDED BIOS MODE SELECTION

                 Setting                                W12

                    VT100                        Pins 3 & 4 closed

               Serial download                   Pins 1 & 2 closed

               Standard mode                    Pins 3 & 4 closed

                Normal mode                     Pins 1 & 2 closed

