
LANNER ELECTRONICS, INC.

AP-500

Device Type         Mainboard
Processor           CX 6X86/CX M2/AM K5/AM K6/Pentium
Processor Speed     75/90/100/120/133/150/166/180/200MHz
Chip Set            Intel
Video Chip Set      None
Maximum Onboard     128MB (EDO & SDRAM supported)
Memory
Maximum Video       None
Memory
Cache               512KB
BIOS                Award
Dimensions          338mm x 122mm
I/O Options         Floppy drive interface, green PC connector, IDE
                    interfaces (2), parallel port, PS/2 mouse port, serial
                    ports (2), IR connector, USB connectors (2)
NPU Options         None

[Image]

                                CONNECTIONS

  Purpose                 Location     Purpose                 Location

  PC/104 connector           CN1       IDE interface 1           CN11

  PC/104 connector           CN2       IDE interface 2           CN12

  Serial port 1              CN3       IDE interface LED          J1

  PS/2 mouse port            CN4       Power LED & keylock        J2

  Serial port 2              CN5       Speaker                    J3

  IR connector               CN6       Turbo LED                  J4

  USB connector 2            CN7       Reset switch               J5

  USB connector 1            CN8       Green PC connector         JP2

  Parallel port              CN9       Auxiliary keyboard        KCN1
                                       connector

  Floppy drive              CN10       Power connector            PS1
  interface

                        USER CONFIGURABLE SETTINGS

                Function                     Label           Position

     Factory configured - do not alter       JP6              Open

     PS/2 mouse IRQ12 enabled                JP9             Closed

      PS/2 mouse IRQ12 disabled               JP9              Open

             DRAM CONFIGURATION

     Size          Bank 0        Bank 1

      8MB        (2) 1M x 36      None

     16MB        (2) 2M x 36      None

     16MB        (2) 1M x 36   (2) 1M x 36

     24MB        (2) 2M x 36   (2) 1M x 36

     32MB        (2) 4M x 36      None

     32MB        (2) 2M x 36   (2) 2M x 36

     40MB        (2) 4M x 36   (2) 1M x 36

     48MB        (2) 4M x 36   (2) 2M x 36

     64MB        (2) 8M x 36      None

     64MB        (2) 4M x 36   (2) 4M x 36

     72MB        (2) 8M x 36   (2) 1M x 36

     80MB        (2) 8M x 36   (2) 2M x 36

     96MB        (2) 8M x 36   (2) 4M x 36

     128MB       (2) 8M x 36   (2) 8M x 36

  Note: Board accepts EDO memory.

      CACHE CONFIGURATION

      Size          Bank 0

     512KB       (2) 64K x 32

                       CPU SPEED SELECTION (CX 6X86)

    CPU speed      Clock speed      Multiplier        JP1         JP10

     120MHz           50MHz             2x           1 & 2      1 & 2, 3
                                                                  & 4

     133MHz           55MHz             2x           1 & 2        Open

     150MHz           60MHz             2x           1 & 2       1 & 2

     166MHz           66MHz             2x           1 & 2       3 & 4

  Note: Pins designated should be in the closed position.

                        CPU SPEED SELECTION (CX M2)

     CPU speed       Clock speed    Multiplier       JP1          JP10

      166MHz            66MHz           2x          1 & 2        3 & 4

      200MHz            66MHz           3x          3 & 4        3 & 4

  Note: Pins designated should be in the closed position.

                        CPU SPEED SELECTION (AM K5)

    CPU speed      Clock speed     Multiplier         JP1         JP10

      75MHz           50MHz           1.5x           Open        1 & 2, 3
                                                                   & 4

      90MHz           60MHz           1.5x           Open         1 & 2

     100MHz           66MHz           1.5x           Open         3 & 4

     120MHz           60MHz            2x            1 & 2        1 & 2

     133MHz           66MHz            2x            1 & 2        3 & 4

     150MHz           60MHz           2.5x         1 & 2, 3 &     1 & 2
                                                       4

     166MHz           66MHz           2.5x         1 & 2, 3 &     3 & 4
                                                       4

     180MHz           60MHz            3x            3 & 4        1 & 2

     200MHz           66MHz            3x            3 & 4        3 & 4

  Note: Pins designated should be in the closed position.

                        CPU SPEED SELECTION (AM K6)

    CPU speed       Clock speed     Multiplier        JP1         JP10

      166MHz           66MHz           2.5x         1 & 2, 3     3 & 4
                                                      & 4

      200MHz           66MHz            3x           3 & 4       3 & 4

  Note: Pins designated should be in the closed position.

                        CPU SPEED SELECTION (INTEL)

    CPU speed      Clock speed     Multiplier         JP1         JP10

      75MHz           50MHz           1.5x           Open        1 & 2, 3
                                                                   & 4

      90MHz           60MHz           1.5x           Open         1 & 2

     100MHz           66MHz           1.5x           Open         3 & 4

     120MHz           60MHz            2x            1 & 2        1 & 2

     133MHz           66MHz            2x            1 & 2        3 & 4

     150MHz           60MHz           2.5x         1 & 2, 3 &     1 & 2
                                                       4

     166MHz           66MHz           2.5x         1 & 2, 3 &     3 & 4
                                                       4

     180MHz           60MHz            3x            3 & 4        1 & 2

     200MHz           66MHz            3x            3 & 4        3 & 4

  Note: Pins designated should be in the closed position.

                      CPU SPEED SELECTION (INTEL MMX)

    CPU speed       Clock speed     Multiplier        JP1         JP10

      166MHz           66MHz           2.5x         1 & 2, 3     3 & 4
                                                      & 4

      200MHz           66MHz            3x           3 & 4       3 & 4

  Note: Pins designated should be in the closed position.

                      CPU VOLTAGE SELECTION (SINGLE)

                Voltage                                JP5

                  3.3v                         Pins 1 & 2 closed

                   3.52v                        Pins 2 & 3 closed

                       CPU VOLTAGE SELECTION (DUAL)

               Voltage                                 JP8

                  2.8v                         Pins 1 & 2 closed

                   3.3v                         Pins 2 & 3 closed

                    CPU VOLTAGE SELECTION (AUTO DETECT)

                 Setting                                 JP7

                 Auto detect                     Pins 1 & 2 closed

             Reduce Q3 temperature                Pins 2 & 3 closed

                           CPU VOLTAGE SELECTION

      Voltage             JP7                JP8               JP12

       3.3v            Pins 2 & 3         Pins 2 & 3           Open
                         closed             closed

       3.52v           Pins 2 & 3            Open             Closed
                         closed

            Note: Use this setting only if Q3 temperature needs to be
            reduced. Single voltage only. If an MMX CPU is installed,
            jumpers JP5, JP7 & JP8 must be set to the default setting.

                      WATCHDOG TIMER ACTIVE SELECTION

               Time out                                JP3

                  .5 sec                        Pins 2 & 3 closed

                   1 sec                        Pins 5 & 6 closed

                   2 sec                        Pins 8 & 9 closed

                  4 sec                       Pins 11 & 12 closed

                   8 sec                       Pins 10 & 11 closed

                  16 sec                        Pins 7 & 8 closed

                  32 sec                        Pins 4 & 5 closed

                  64 sec                        Pins 1 & 2 closed

                      WATCHDOG TIMER ACTIVE SELECTION

                Setting                                 JP4

               Reset system                     Pins 1 & 2 closed

                 NMI system                      Pins 2 & 3 closed

                  Disabled                             Open

        ROM DISK ADDRESS SELECTION

       Setting               JP11

        C8000         Pins 1 & 2 closed

        D0000         Pins 3 & 4 closed

        D8000         Pins 5 & 6 closed

