
TYAN COMPUTER CORPORATION

S1696DLUA

Device Type             Mainboard
Processor               Pentium II
Processor Speed         200/233/266/300/333MHz
Chip Set                Intel
Video Chip Set          None
Maximum Onboard Memory  1GB (EDO & SDRAM supported)
Maximum Video Memory    None
Cache                   256/512KB (located on Pentium II CPU)
BIOS                    AMI
Dimensions              305mm x 244mm
I/O Options             32-bit PCI slots (4), floppy drive interface, game
                        port, green PC connector, IDE interfaces (2), SCSI
                        interface, Wide Ultra SCSI interface, parallel
                        port, PS/2 mouse port, serial ports (2), IR
                        connector, USB connectors (2), ATX power
                        connector, AGP slot, line in, line out, microphone
                        in, RAID slot
NPU Options             None

[Image]

                                CONNECTIONS

  Purpose                Location      Purpose                Location

  AGP slot                 AGP         Ultra Wide SCSI          CN15
                                       interface

  ATX power                ATX         Ultra Wide SCSI          CN16
  connector                            interface

  Game port                CN1         Chassis fan power        FAN1

  Microphone in            CN2         Chassis fan power        FAN2

  Line in                  CN3         Chassis fan power        FAN3

  Line out                 CN4         Soft off power      J25/pins 1 & 2
                                       supply

  Serial port 2            CN5         Green PC connector  J25/pins 3 & 4

  Serial port 1            CN6         IR connector         J25/pins 6 -
                                                                 11

  Parallel port            CN7         IDE interface LED    J25/pins 13 -
                                                                 16

  USB connector 1          CN8         Power LED            J25/pins 18 -
                                                                 20

  USB connector 2          CN9         Reset switch         J25/pins 22 &
                                                                 23

  PS/2 mouse port          CN10        Speaker              J25/pins 24 -
                                                                 27

  Floppy drive             CN11        Wake on LAN              JP21
  interface                            connector

  IDE interface 1          CN12        SCSI interface LED       JP22

  IDE interface 2          CN13        32-bit PCI slots      PC1  PC4

  SCSI interface           CN14        RAID slot                SL1

                        USER CONFIGURABLE SETTINGS

               Function                    Label           Position

     Factory configured - do not           J20          Unidentified
      alter

     Factory configured - do not           JP2              Open
      alter

     CMOS memory normal operation          JP3        Pins 1 & 2 closed

      CMOS memory clear                     JP3        Pins 2 & 3 closed

     Flash BIOS voltage select 5v          JP4        Pins 1 & 2 closed

      Flash BIOS voltage select 12v         JP4        Pins 2 & 3 closed

     SCSI PCI ID select AD 26             JP23        Pins 1 & 2 closed

      SCSI PCI ID select AD 24             JP23        Pins 2 & 3 closed

     Factory configured - do not          JP30A         Unidentified
      alter

     Factory configured - do not          JP31          Unidentified
      alter

     Factory configured - do not          JP32          Unidentified
      alter

     Factory configured - do not          JP33          Unidentified
      alter

     Factory configured - do not          JP34          Unidentified
      alter

     Factory configured - do not          JP36          Unidentified
      alter

     Factory configured - do not          JP38             Closed
      alter

                    USER CONFIGURABLE SETTINGS (CONT)

                Function                     Label           Position

     Factory configured - do not alter       JP39            Closed

     Factory configured - do not alter       JP40             Open

     Factory configured - do not alter       JP48             Open

  Note: The location of JP48 is unidentified.

                            DIMM CONFIGURATION

     Size          Bank 0         Bank 1         Bank 2         Bank 3

      8MB        (1) 1M x 64       None           None           None

     16MB        (1) 2M x 64       None           None           None

     16MB        (1) 1M x 64   (1) 1M x 64        None           None

     24MB        (1) 2M x 64   (1) 1M x 64        None           None

     24MB        (1) 1M x 64   (1) 1M x 64    (1) 1M x 64        None

     32MB        (1) 4M x 64       None           None           None

     32MB        (1) 2M x 64   (1) 2M x 64        None           None

     32MB        (1) 1M x 64   (1) 1M x 64    (1) 1M x 64    (1) 1M x 64

     40MB        (1) 4M x 64   (1) 1M x 64        None           None

     48MB        (1) 4M x 64   (1) 2M x 64        None           None

     48MB        (1) 2M x 64   (1) 2M x 64    (1) 2M x 64        None

     64MB        (1) 2M x 64   (1) 2M x 64    (1) 2M x 64    (1) 2M x 64

     64MB        (1) 8M x 64       None           None           None

     64MB        (1) 4M x 64   (1) 4M x 64        None           None

     72MB        (1) 8M x 64   (1) 1M x 64        None           None

     80MB        (1) 8M x 64   (1) 2M x 64        None           None

     96MB        (1) 8M x 64   (1) 4M x 64        None           None

     96MB        (1) 4M x 64   (1) 4M x 64    (1) 4M x 64        None

     128MB       (1) 16M x 64      None           None           None

     128MB       (1) 8M x 64   (1) 8M x 64        None           None

     128MB       (1) 4M x 64   (1) 4M x 64    (1) 4M x 64    (1) 4M x 64

     136MB       (1) 16M x 64  (1) 1M x 64        None           None

     144MB       (1) 16M x 64  (1) 2M x 64        None           None

     152MB       (1) 16M x 64  (1) 1M x 64    (1) 1M x 64    (1) 1M x 64

     160MB       (1) 16M x 64  (1) 4M x 64        None           None

     176MB       (1) 16M x 64  (1) 2M x 64    (1) 2M x 64    (1) 2M x 64

     192MB       (1) 16M x 64  (1) 8M x 64        None           None

                        DIMM CONFIGURATION (CONT)

      Size          Bank 0        Bank 1         Bank 2         Bank 3

     192MB        (1) 8M x 64   (1) 8M x 64    (1) 8M x 64       None

     224MB         (1) 16M x    (1) 4M x 64    (1) 4M x 64   (1) 4M x 64
                      64

     256MB         (1) 32M x       None           None           None
                      64

     256MB         (1) 16M x     (1) 16M x        None           None
                      64            64

     256MB        (1) 8M x 64   (1) 8M x 64    (1) 8M x 64   (1) 8M x 64

     272MB         (1) 16M x     (1) 16M x     (1) 1M x 64   (1) 1M x 64
                      64            64

     280MB         (1) 32M x    (1) 1M x 64    (1) 1M x 64   (1) 1M x 64
                      64

     288MB         (1) 16M x     (1) 16M x     (1) 2M x 64   (1) 2M x 64
                      64            64

     304MB         (1) 32M x    (1) 2M x 64    (1) 2M x 64   (1) 2M x 64
                      64

     320MB         (1) 16M x     (1) 16M x     (1) 4M x 64   (1) 4M x 64
                      64            64

     320MB         (1) 16M x    (1) 8M x 64    (1) 8M x 64   (1) 8M x 64
                      64

     352MB         (1) 32M x    (1) 4M x 64    (1) 4M x 64   (1) 4M x 64
                      64

     384MB         (1) 16M x     (1) 16M x      (1) 16M x        None
                      64            64             64

     448MB         (1) 32M x    (1) 8M x 64    (1) 8M x 64   (1) 8M x 64
                      64

     512MB         (1) 32M x     (1) 32M x        None           None
                      64            64

     512MB         (1) 16M x     (1) 16M x      (1) 16M x    (1) 16M x 64
                      64            64             64

     640MB         (1) 32M x     (1) 16M x      (1) 16M x    (1) 16M x 64
                      64            64             64

     768MB         (1) 32M x     (1) 32M x      (1) 32M x        None
                      64            64             64

     1024MB        (1) 32M x     (1) 32M x      (1) 32M x    (1) 32M x 64
                      64            64             64

            Note: Board accepts EDO & SDRAM memory. Maximum SDRAM is
            512MB. Maximum EDO is 1GB.

                        DIMM VOLTAGE CONFIGURATION

     Voltage          J30            J31           J32           J33

        3.3v        Closed        Closed        Closed         Closed

          5v          Open          Open          Open           Open

                    DIMM VOLTAGE CONFIGURATION (CONT)

     Voltage          J34            J35           J36           J37

        3.3v         Open          Open          Open           Open

          5v         Closed        Closed        Closed         Closed

                     CACHE CONFIGURATION

  Note: 256KB/512KB cache is located on the Pentium II CPU.

                            CPU SPEED SELECTION

    CPU      Clock    Multiplier     JP7       JP8       JP9       JP10
  speed     speed

  200MHz    66MHz         3x        Closed    Closed     Open     Closed

  233MHz    66MHz        3.5x       Closed     Open      Open     Closed

  266MHz    66MHz         4x        Closed    Closed    Closed     Open

  300MHz    66MHz        4.5x       Closed     Open     Closed     Open

  333MHz    66MHz         5x        Closed    Closed     Open      Open

                           SERIAL PORT SELECTION

     Setting           JP41           JP42          JP45         JP46

  Used as serial     Pins 1 & 2    Pins 1 & 2      Closed        Open
       port           closed         closed

    Used as IR       Pins 2 & 3    Pins 2 & 3       Open        Closed
    connector         closed         closed

  Note: The location of JP45 & JP46 is unidentified.

                        SCSI TERMINATION SELECTION

           Setting                     JP43                  JP44

      SCSI high byte enabled   Pins 1 & 2 closed      Pins 1 & 2 closed

         Controlled by SCSI     Pins 2 & 3 closed      Pins 2 & 3 closed
               chip

