
HEWLETT-PACKARD COMPANY

HP VECTRA VE 5/XXX SERIES 3

Device Type          Mainboard
Processor            Pentium
Processor Speed      75/90/100/120/133/150/166/200MHz
Chip Set             SIS
Video Chip Set       None
Maximum Onboard      192MB (EDO supported)
Memory
Maximum Video Memory None
Cache                256KB
BIOS                 Unidentified
Dimensions           275mm x 205mm
I/O Options          Floppy drive interface, IDE interfaces (2), parallel
                     port, PS/2 mouse port, serial ports (2), cache slot
NPU Options          None

[Image]

                                CONNECTIONS

  Purpose                   Location   Purpose                   Location

  3.3v power                  C1       Parallel port               CN4

  Speaker                     C2       PS/2 mouse port             CN5

  Status panel connector      C3       IDE interface 1             CN6

  External battery            C4       IDE interface 2             CN7

  5v power                    C5       Floppy drive interface      CN8

  VGA port                    CN1      VGA feature connector       CN9

  Serial port 2               CN2      Cache slot                  SL1

  Serial port 1               CN3

                        USER CONFIGURABLE SETTINGS

                Function                     Label           Position

      Serial EEPROM flag normal               J15             Closed
      operation

      Serial EEPROM flag clear                J15              Open

     Keyboard power down enabled             JP4             Closed

      Keyboard power down disabled            JP4              Open

     Flash BIOS enabled                     SW1/1             Off

      Flash BIOS disabled                    SW1/1              On

     CMOS memory normal operation           SW1/2             Off

      CMOS memory clear                      SW1/2              On

     Password normal operation              SW1/3             Off

      Password clear                         SW1/3              On

                      SIMM CONFIGURATION

      Size          Bank 0          Bank 1          Bank 2

      16MB        (2) 2M x 36        None            None

      32MB        (2) 2M x 36     (2) 2M x 36        None

      32MB        (2) 4M x 36        None            None

      48MB        (2) 2M x 36     (2) 2M x 36    (2) 2M x 36

      64MB        (2) 4M x 36     (2) 4M x 36        None

      64MB        (2) 8M x 36        None            None

      96MB        (2) 4M x 36     (2) 4M x 36    (2) 4M x 36

     128MB        (2) 8M x 36     (2) 8M x 36        None

     128MB       (2) 16M x 36        None            None

     144MB       (2) 16M x 36     (2) 2M x 36        None

                  SIMM CONFIGURATION (CONT)

      Size          Bank 0          Bank 1          Bank 2

     160MB       (2) 16M x 36     (2) 2M x 36    (2) 2M x 36

     160MB       (2) 16M x 36     (2) 4M x 36        None

     192MB       (2) 16M x 36     (2) 4M x 36    (2) 4M x 36

     192MB       (2) 16M x 36     (2) 8M x 36        None

     192MB        (2) 8M x 36     (2) 8M x 36    (2) 8M x 36

            Note: Board accepts EDO memory.

                CACHE CONFIGURATION

           Size                      SL1

          256KB            256KB module installed

                        CACHE JUMPER CONFIGURATION

                   Type                                  J6

                 Synchronous                     Pins 2 & 3 closed

                 Asynchronous                     Pins 1 & 2 closed

                            CPU SPEED SELECTION

  CPU speed      Clock      Multiplier      J7       SW2/1        SW2/2
                 speed

    75MHz        50MHz         1.5x        2 & 4      Off          Off

    90MHz        60MHz         1.5x        1 & 3      Off          Off

   100MHz        66MHz         1.5x        3 & 4      Off          Off

   120MHz        60MHz          2x         1 & 3       On          Off

   133MHz        66MHz          2x         3 & 4       On          Off

   150MHz        60MHz         2.5x        1 & 3       On          On

   166MHz        66MHz         2.5x        3 & 4       On          On

   200MHz        66MHz          3x         3 & 4      Off          On

  Note: Pins designated should be in the closed position.

