
BLACK BOX CORPORATION

NI5210 10BT, LEO28-C

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      8-bit ISA
Topology      Star
Wiring Type   Unshielded twisted pair
Boot ROM      Available

[Image]

                             DIAGNOSTIC LED(S)

         LED                  Status                   Condition

        LED1                    On              Network connection good

        LED1                    Off               Network connection is
                                                         broken

        LED1                 Blinking            Data is being received

                            INTERRUPT SETTINGS

   IRQ        W2         W3        W4         W5         W6         W7

     2     Closed      Open      Open       Open       Open       Open

      3      Open      Closed     Open       Open       Open       Open

      4      Open       Open     Closed      Open       Open       Open

      5      Open       Open      Open      Closed      Open       Open

      6      Open       Open      Open       Open      Closed      Open

      7      Open       Open      Open       Open       Open      Closed

                          OPTIONAL CHIP SELECTION

           Type                       W9                     W10

             None            Pins 1 & 2 closed       Pins 1 & 2 closed

          8KB RAM chip        Pins 2 & 3 closed       Pins 2 & 3 closed

            Boot ROM          Pins 2 & 3 closed       Pins 1 & 2 closed

  Note:This card can use either a 8KB RAM chip or a boot ROM in the boot
  ROM socket, but not both.

                            BASE MEMORY ADDRESS

     Address           W11           W12            W13           W14

       C0000h      Pins 2 & 3    Pins 2 & 3     Pins 2 & 3    Pins 2 & 3
                      closed        closed        closed        closed

        C4000h      Pins 2 & 3    Pins 2 & 3     Pins 2 & 3    Pins 1 & 2
                      closed        closed        closed        closed

        C8000h      Pins 2 & 3    Pins 2 & 3     Pins 1 & 2    Pins 2 & 3
                      closed        closed        closed        closed

        CC000h      Pins 2 & 3    Pins 2 & 3     Pins 1 & 2    Pins 1 & 2
                      closed        closed        closed        closed

        D0000h      Pins 2 & 3    Pins 1 & 2     Pins 2 & 3    Pins 2 & 3
                      closed        closed        closed        closed

        D4000h      Pins 2 & 3    Pins 1 & 2     Pins 2 & 3    Pins 1 & 2
                      closed        closed        closed        closed

        D8000h      Pins 2 & 3    Pins 1 & 2     Pins 1 & 2    Pins 2 & 3
                      closed        closed        closed        closed

        DC000h      Pins 2 & 3    Pins 1 & 2     Pins 1 & 2    Pins 1 & 2
                      closed        closed        closed        closed

        E0000h      Pins 1 & 2    Pins 2 & 3     Pins 2 & 3    Pins 2 & 3
                      closed        closed        closed        closed

        E4000h      Pins 1 & 2    Pins 2 & 3     Pins 2 & 3    Pins 1 & 2
                      closed        closed        closed        closed

        E8000h      Pins 1 & 2    Pins 2 & 3     Pins 1 & 2    Pins 2 & 3
                      closed        closed        closed        closed

        EC000h      Pins 1 & 2    Pins 2 & 3     Pins 1 & 2    Pins 1 & 2
                      closed        closed        closed        closed

                             I/O BASE ADDRESS

     Address        W15       W16      W17       W18      W19       W20

         200h      Pins 2    Pins 2   Pins 2    Pins 2   Pins 2    Pins 2
                    & 3       & 3      & 3       & 3      & 3       & 3

         208h      Pins 2    Pins 2   Pins 2    Pins 2   Pins 2    Pins 1
                    & 3       & 3      & 3       & 3      & 3       & 2

         210h      Pins 2    Pins 2   Pins 2    Pins 2   Pins 1    Pins 2
                    & 3       & 3      & 3       & 3      & 2       & 3

         218h      Pins 2    Pins 2   Pins 2    Pins 2   Pins 1    Pins 1
                    & 3       & 3      & 3       & 3      & 2       & 2

         350h      Pins 1    Pins 2   Pins 1    Pins 2   Pins 1    Pins 2
                    & 2       & 3      & 2       & 3      & 2       & 3

         358h      Pins 1    Pins 2   Pins 1    Pins 2   Pins 1    Pins 1
                    & 2       & 3      & 2       & 3      & 2       & 2

        360h      Pins 1    Pins 2   Pins 1    Pins 1   Pins 2    Pins 2
                    & 2       & 3      & 2       & 2      & 3       & 3

         368h      Pins 1    Pins 2   Pins 1    Pins 1   Pins 2    Pins 1
                    & 2       & 3      & 2       & 2      & 3       & 2

         370h      Pins 1    Pins 2   Pins 1    Pins 1   Pins 1    Pins 2
                    & 2       & 3      & 2       & 2      & 2       & 3

         3E0h      Pins 1    Pins 1   Pins 1    Pins 1   Pins 2    Pins 2
                    & 2       & 2      & 2       & 2      & 3       & 3

         3E8h      Pins 1    Pins 1   Pins 1    Pins 1   Pins 2    Pins 1
                    & 2       & 2      & 2       & 2      & 3       & 2

         3F0h      Pins 1    Pins 1   Pins 1    Pins 1   Pins 1    Pins 2
                    & 2       & 2      & 2       & 2      & 2       & 3

         3F8h      Pins 1    Pins 1   Pins 1    Pins 1   Pins 1    Pins 1
                    & 2       & 2      & 2       & 2      & 2       & 2

  Note: Pins designated should be in the closed position.

  A full range of I/O addresses are available, in increments of 8h, from
  200h to 3F8h for a total of 64 addresses. The 12 examples given are
  taken from the beginning (first four), the middle (middle four), and
  the end (last four) of the 64 addresses. To figure out the correct
  configuration for the I/O address you wish to use, subtract 200h from
  the address, divide the remainder by 08h, and convert the quotient to a
  6-digit binary number. The binary number will represent the setting of
  each jumper. Each 0 represents pins 2 & 3 closed while each 1
  represents pins 1 & 2 closed. W20G is the most significant bit (MSB)
  and W20L is the least significant bit (LSB). For example, If the
  desired address is 228h; 228h-200h=28h; 28h/08h=05h; 05h=000101b, and
  the setting should be:

       Address      W20G     W20H      W20I     W20J      W20K     W20L

         228h      Pins 2    Pins 2   Pins 2    Pins 1   Pins 2    Pins 1
                    & 3       & 3      & 3       & 2      & 3       & 2

