
PURE DATA LTD.

PDI515

NIC Type      ARCnet
Transfer Rate 2.5Mbps
Data Bus      16-bit ISA
Topology      Star

              Linear Bus
Wiring Type   RG-62A/U 93ohm coaxial

              Shielded/Unshielded twisted pair
Boot ROM      Available

[Image]

                               NODE ADDRESS

  Node   SW1/1    SW1/2   SW1/3   SW1/4    SW1/5   SW1/6    SW1/7   SW1/8

   0       -       -        -       -       -        -       -        -

   1      On       On      On      On       On      On       On      Off

   2      On       On      On      On       On      On      Off      On

   3      On       On      On      On       On      On      Off      Off

   4      On       On      On      On       On      Off      On      On

  251     Off     Off      Off     Off     Off      On      Off      Off

  252     Off     Off      Off     Off     Off      Off      On      On

  253     Off     Off      Off     Off     Off      Off      On      Off

  254     Off     Off      Off     Off     Off      Off     Off      On

  255     Off     Off      Off     Off     Off      Off     Off      Off

  Note:Node address 0 is used for messaging between nodes and must not be
  used.

       A total of 255 node address settings are available. The switches
       are a binary representation of the decimal node addresses. Switch
       8 is the Least Significant Bit and switch 1 is the Most
       Significant Bit. The switches have the following decimal values:
       switch 8=1, 7=2, 6=4, 5=8, 4=16, 3=32, 2=64, 1=128. Turn off the
       switches and add the values of the off switches to obtain the
       correct node address. (On=0, off=1)

                            MEMORY ADDRESS MODE

                   Mode                                 SW2/1

        16-bit memory addressing mode                   On

         8-bit memory addressing mode                    Off

  Note:Two boot ROMs must be installed for 16-bit memory addressing mode.

                            COMPATABILITY MODE

                  Mode                                 SW2/2

                  Normal                               Off

                   Special                              On

                          BASE MEMORY ADDRESS

     Address            SW2/3             SW2/4            SW2/5

  C0000 - C3FFFh         On                On                On

  C4000 - C7FFFh         On                On               Off

  CC000 - CFFFFh         On                Off               On

  D0000 - D3FFFh         On                Off              Off

  D4000 - D7FFFh         Off               On                On

  D8000 - DBFFFh         Off               On               Off

  DC000 - DFFFFh         Off               Off               On

             I/O BASE ADDRESS

  Address    SW2/6      SW2/7      SW2/8

   260h        On         On        On

   290h        On         On        Off

   2E0h        On        Off        On

   2F0h        On        Off        Off

   300h       Off         On        On

   350h       Off         On        Off

   380h       Off        Off        On

   3E0h       Off        Off        Off

                                CABLE TYPE

                     Type                             JP1A & JP1B

        Shielded/Unshielded twisted pair          Pins 1 & 2 Closed

              RG-62A/U 93ohm coaxial               Pins 2 & 3 Closed

                                MEMORY MODE

                  Mode                                  JP2

        Shared Memory mode enabled              Pins 2 & 3 Closed

           Mapped I/O mode enabled               Pins 1 & 2 Closed

  Note:When Mapped I/O mode is enabled, SW2/1 (Memory address mode) must
  be in 8-bit mode (off).

                          TOPOLOGY CONFIGURATION

                Topology                                JP3

               Star Topology                    Pins 1 & 2 Closed

                Bus Topology                     Pins 2 & 3 Closed

                                       INTERRUPT REQUEST

  IRQ   JP4A     JP4B     JP4C     JP4D     JP5A    JP5B     JP5C     JP5D     JP5E     JP5F

  2     Open     Open     Open     Open    Closed   Open     Open     Open     Open     Open

  3     Open     Open     Open     Open     Open    Closed   Open     Open     Open     Open

  4     Open     Open     Open     Open     Open    Open     Closed   Open     Open     Open

  5     Open     Open     Open     Open     Open    Open     Open     Closed   Open     Open

  6     Open     Open     Open     Open     Open    Open     Open     Open     Closed   Open

  7     Open     Open     Open     Open     Open    Open     Open     Open     Open    Closed

  10    Closed   Open     Open     Open     Open    Open     Open     Open     Open     Open

  11    Open    Closed    Open     Open     Open    Open     Open     Open     Open     Open

  12    Open     Open    Closed    Open     Open    Open     Open     Open     Open     Open

  15    Open     Open     Open    Closed    Open    Open     Open     Open     Open     Open

                             DIAGNOSTIC LED(S)

      Color             Status                     Condition

       Red            Flasing on         Card is performing a self-test
                       power-up

       Red                On               I/O bus activity detected

       Red               Off              No I/O bus activity detected

      Green               On              Data is being transmitted or
                                                   receiving

      Green            Blinking         Card is not connected to network
                                             or network not active

