
MADGE NETWORKS, LTD.

Smart AT Ringnode

NIC Type      Token-Ring
Transfer Rate 4Mbps
Data Bus      16-bit ISA
Topology      Ring
Wiring Type   Shielded/Unshielded twisted pair
Boot ROM      Available

[Image]

                             INTERRUPT REQUEST

                 IRQ                                  SW1

                    2/9                            Position 8

                    3                             Position 7

                     5                             Position 6

                     7                             Position 5

                    10                             Position 4

                    11                             Position 3

                    12                             Position 2

                    15                             Position 1

                       BASE I/O AND BOOT ROM ADDRESS

        Address            Boot ROM Address       SW2/1          SW2/2

        0A20-0A2Fh          CC000-CDFFFh           On            On

         1A20-1A2Fh          DC000-DDFFFh          Off            On

         2A20-2A2Fh          CE000-CFFFFh           On            Off

         3A20-3A2Fh          DE000-DFFFFh          Off            Off

                                 BOOT ROM

                 Setting                               SW2/3

                  Disabled                             Off

                    Enabled                              On

                              BUS MASTER DMA

                 Setting                               SW2/4

                   Enabled                              On

                   Disabled                             Off

  Note: This switch has no effect on the NIC if it is installed in an
  8-bit slot.

                            EXPANSION SLOT SIZE

                Slot Size                               SW2/5

               Automatic select                         On

               Forced 8-bit mode                         Off

       Note: If an 8-bit transfer mode is required and the NIC is
       installed in a 16-bit slot, use forced 8-bit mode. If the NIC is
       to be used in a Novell Netware 386 file server, automatic select
       must be used.

                            COMPATIBILITY MODE

                  Setting                               SW2/6

            Normal ISA bus timing                       On

            Alternate ISA bus timing                     Off

       Note: Alternate ISA bus timing is used if the host computer is not
       100% ISA bus compatible (such as the IBM PS/2 model 30-286) or if
       the Madge Ringnode diagnostics program fails to locate the NIC.

                              DMA CHANNEL BUS

                  Setting                               SW2/7

      Asynchronous bus (uses host system's               On
                     clock)

        Synchronous bus (uses NIC on-board               Off
                     clock)

  Note: Synchronous bus is used for systems that have a clock speed less
  than 10MHz.

        DMA CHANNEL

   Channel         SW3

     DMA1      Position 1

     DMA3      Position 2

     DMA5      Position 3

     DMA6      Position 4

                                CABLE TYPE

                   Type                                  SW4

  Shielded twisted pair (DB-9 connector)             Position 1

  Shielded/Unshielded twisted pair (RJ-45            Position 2
                   jack)

  FACTORY CONFIGURED SETTINGS

     Jumper         Setting

     SW2/8             On

