
PROTEON, INC.

PRONET-10 P1308

NIC Type      Token Ring
Transfer Rate 4/16Mbps
Data Bus      16-bit ISA
Topology      Star
Wiring Type   Unshielded twisted pair

              AUI transceiver via DB-15 port
Boot ROM      Available

[Image]

                               NODE ADDRESS

  Node   SW1/1    SW1/2   SW1/3   SW1/4    SW1/5   SW1/6    SW1/7   SW1/8

   0       -       -        -       -       -        -       -        -

   1      Off      On      On      On       On      On       On      On

   2      On      Off      On      On       On      On       On      On

   3      Off     Off      On      On       On      On       On      On

   4      On       On      Off     On       On      On       On      On

  251     Off     Off      On      Off     Off      Off     Off      Off

  252     On       On      Off     Off     Off      Off     Off      Off

  253     Off      On      Off     Off     Off      Off     Off      Off

  254     On      Off      Off     Off     Off      Off     Off      Off

  255     Off     Off      Off     Off     Off      Off     Off      Off

  Note:Node address 0 is used for messaging between nodes and must not be
  used.

       A total of 255 node address settings are available. The switches
       are a binary representation of the decimal node addresses. Switch
       1 is the Least Significant Bit and switch 8 is the Most
       Significant Bit. The switches have the following decimal values:
       switch 1=1, 2=2, 3=4, 4=8, 5=16, 6=32, 7=64, 8=128. Turn off the
       switches and add the values of the off switches to obtain the
       correct node address. (On=0, off=1)

                            16-BIT DMA CHANNEL

           Channel                    JP1                    JP15

             DMA5            Pins 3 & 4 and 5 & 6    Pins 2 & 3 closed
                                     closed

              DMA6            Pins 3 & 4 and 2 & 7    Pins 2 & 4 closed
                                     closed

              DMA7            Pins 3 & 4 and 1 & 8    Pins 1 & 2 closed
                                     closed

            Disabled                  Open                   Open

  Note:For use in an AT-class machine only.

                             8-BIT DMA CHANNEL

           Channel                    JP7                    JP18

             DMA1            Pins 3 & 4 and 2 & 7    Pins 1 & 2 closed
                                     closed

              DMA2            Pins 3 & 4 and 1 & 8    Pins 2 & 3 closed
                                     closed

              DMA3            Pins 3 & 4 and 5 & 6    Pins 2 & 4 closed
                                     closed

            Disabled                  Open                   Open

  Note:Can be used in either a PC/XT-class machine or an AT-class
  machine.

                             INTERRUPT REQUEST

                 IRQ                                  JP22

                   2                          Pins 2 & 6 closed

                    3                          Pins 5 & 9 closed

                    4                          Pins 4 & 8 closed

                    5                          Pins 3 & 7 closed

                    10                         Pins 9 & 13 closed

                    11                         Pins 8 & 12 closed

                    12                         Pins 7 & 11 closed

                    14                         Pins 1 & 6 closed

                    15                         Pins 6 & 10 closed

                            COMPATIBILITY MODE

            Setting                     JP32                  JP36

         Compatibility mode      Pins 1 & 2 closed    Pins 1 & 2 closed
               enabled

        Extended mode enabled     Pins 2 & 3 closed    Pins 2 & 3 closed

  Note:Extended mode provides 16-bit data transfers and hardware
  checksums in an AT-class machine when the card is installed in a 16-bit
  slot. When the card is installed in an 8-bit slot, extended mode only
  provides hardware checksums.

                                 BOOT ROM

                 Setting                               JP38

                 Disabled                             Open

                   Enabled                            Closed

                                CABLE TYPE

               Type                   JP40      JP42      JP44     JP46

      Unshielded twisted pair        Closed    Closed    Closed   Closed

  AUI transceiver via DB-15 port      Open      Open      Open     Open

                             BOOT ROM ADDRESS

      Address          SW2/1         SW2/2         SW2/3         SW2/4

         C0000h          On           On            On            On

         C4000h          On           On            On            Off

         C8000h          On           On            Off           On

         CC000h          On           On            Off           Off

         D0000h          On           Off           On            On

         D4000h          On           Off           On            Off

        D8000h          On           Off           Off           On

         DC000h          On           Off           Off           Off

         E0000h         Off           On            On            On

         E4000h         Off           On            On            Off

         E8000h         Off           On            Off           On

         EC000h         Off           On            Off           Off

         F0000h         Off           Off           On            On

         F4000h         Off           Off           On            Off

         F8000h         Off           Off           Off           On

         FC000h         Off           Off           Off           Off

                             I/O BASE ADDRESS

    Address          SW2/5         SW2/6         SW2/7          SW2/8

  300h 1              On            On             On             On

  308h                On            On             On            Off

  310h 1              On            On            Off             On

  318h                On            On            Off            Off

  320h 1              On            Off            On             On

  328h                On            Off            On            Off

  330h 1              On            Off           Off             On

  338h                On            Off           Off            Off

  340h 1              Off           On             On             On

  348h                Off           On             On            Off

  350h 1              Off           On            Off             On

  358h                Off           On            Off            Off

  360h 1              Off           Off            On             On

  368h                Off           Off            On            Off

  370h 1              Off           Off           Off            Off

  378h                Off           Off           Off            Off

  Note: Use any of the above settings when compatibility mode (JP32 &
  JP36) is enabled.

  Note 1 :Use only these settings when extended mode (JP32 & JP36) is
  enabled.

