
EVENTIDE, INC.

WLZ-320 (FOR HP SERIES 200, 300, & 400)

NIC Type         Ethernet
Transfer Rate    10Mbps
Data Bus         Hewlet-Packard backplane DIO bus.
Topology         Linear Bus
Wiring Type      RG58A/U 50ohm coaxial

                 AUI transceiver via DB-15 port
Boot ROM         Available (Card comes standard with a Boot ROM)

[Image]

                                CABLE TYPE

             Type              JP4A - JP4F        JP8            JP10

     RG58A/U 50ohm coaxial     Pins 2 & 3     Pins 2 & 3     Pins 2 & 3
                                  closed         closed         closed

        AUI transceiver via     Pins 1 & 2     Pins 2 & 3     Pins 1 & 2
       DB-15 port (10Base5)       closed         closed         closed

        AUI transceiver via     Pins 1 & 2     Pins 1 & 2     Pins 1 & 2
       DB-15 port (10Base2)       closed         closed         closed

                             INTERRUPT REQUEST

           IRQ                     SW1/1                   SW1/2

              3                     On                       On

              4                     Off                      On

             5                     On                      Off

              6                     Off                     Off

  Note:The manufacturer warns that this option should not be altered from
  the default.

             FACTORY CONFIGURED SETTINGS

     Function          Switch            Setting

  Remote Console        SW1/3              On

    ROM DTACK           SW1/4              On

                             CARD SELECT CODE

     Code        SW1/1       SW2/2       SW2/3       SW2/4        SW2/5

        16        Off          On          On          On          On

        17        Off          On          On          On          Off

        18        Off          On          On         Off          On

        19        Off          On          On         Off          Off

        20        Off          On         Off          On          On

       21        Off          On         Off          On          Off

        22        Off          On         Off         Off          On

        23        Off          On         Off         Off          Off

        24        Off         Off          On          On          On

        25        Off         Off          On          On          Off

        26        Off         Off          On         Off          On

        27        Off         Off          On         Off          Off

        28        Off         Off         Off          On          On

        29        Off         Off         Off          On          Off

        30        Off         Off         Off         Off          On

        31        Off         Off         Off         Off          Off

  Note:If more than one card is used in a single computer, each card must
  be set to a different code.

                       BOOT ROM ADDRESS

  Boot ROM Address    SW2/6      SW2/7      SW2/8      SW2/9

       20000h          Off         On         On        On

       40000h           On        Off         On        On

       60000h          Off        Off         On        On

       80000h           On         On        Off        On

       A0000h          Off         On        Off        On

       C0000h           On        Off        Off        On

       E0000h          Off        Off        Off        On

      100000h           On         On         On        Off

      120000h          Off         On         On        Off

      140000h           On        Off         On        Off

      160000h          Off        Off         On        Off

      180000h           On         On        Off        Off

      1A0000h          Off         On        Off        Off

      1C0000h           On        Off        Off        Off

      1E0000h          Off        Off        Off        Off

                             BOOT ROM REVISION

                Revision                              SW2/10

               3.0 or later                            On

              Earlier than 3.0                          Off

  Note:The boot ROM revision number is, in most cases, displayed when the
  system is booted. If the switch is set to On when it should be set to
  Off, the following message will be displayed: "Wrong Boot ROM Version
  (1.0, 2.0, or 3.0L) Please change config switch on LAN card". If the
  switch is set to Off when it should be set On, the card will not be
  recognized, and will not log into the network.

