
AST RESEARCH, INC.

AST ETHERNODE (202246-001)

Transfer Rate 10Mbps
Data Bus      8-bit ISA
Topology      Linear bus
Wiring Type   RG-58A/U 50ohm coaxial

              AUI transceiver via DB-15 port
Boot ROM      Not available

[Image]

                                SLEEP MODE

                 Setting                                 E2

                  Disabled                            Closed

                    Enabled                             Open

  Note: When sleep mode is enabled the card is disabled. The card cannot
  be accessed by the computer or the network. This option is provided to
  simplify trouble shooting system conflicts.

                                CABLE TYPE

              Type
                                          E3
                                                               E4

  
       RG-58A/U 50ohm coaxial
                                         Open
                                                             Closed


         AUI transceiver via
             DB-15 port
                                        Closed
                                                              Open

       Note:E3 and E4 are not jumpers, they are receptacles for a
       terminating resistor. In this case open means that the resistor is
       not installed while closed would mean that the resistor is
       installed.

                                  CARD ID

    Setting           E5             E6            E7             E8

         A         Closed          Open          Open           Open

          B          Open          Closed         Open           Open

          C          Open           Open         Closed          Open

          D          Open           Open          Open          Closed

  Note: Up to four cards can be installed at once into the same system.
  If more than one card is installed in the
  system, each must have a distinct ID.

  FACTORY CONFIGURED SETTINGS

     Jumper
                    Setting

       E1
                     Closed

                            MISCELLANEOUS NOTES

  To completely configure this card, the software that comes with it must
  be used..

